[Nov 24, 2023] Valid HPE0-J68 Test Answers & HP HPE0-J68 Exam PDF
Realistic HPE0-J68 Exam Dumps with Accurate & Updated Questions
HPE ASE - Storage Solutions Architect V3 certification is recognized globally as a significant achievement in the IT industry. HPE Storage Solutions certification validates the candidate's ability to design, implement, and manage complex storage solutions using HPE products and technologies. HPE Storage Solutions certification is highly valued by employers and can lead to increased job opportunities and higher salaries.
NEW QUESTION # 46
What is the benefit of HPE Synergy? (Choose two.)
- A. It can compose and reclaim DAS storage.
- B. It supports HPE BladeSystem c-class FlexFabric interconnect modules.
- C. It can prevent block storage services from HPE 3PAR as part of the resource pool.
- D. It can use HPE 3PAR File Persona for object storage.
- E. It supports up to three HPE StoreVirtual VSA nodes for storage RAID.
Answer: A,C
NEW QUESTION # 47
A customer is planning to replace their existing LTO-6 tape library with a new HPE StoreEver MSL2024 tape library. They want to reuse their existing LTO-6 tape cartridges for reads and writes.
What is the latest tape drive technology that will provide backward compatibility?
- A. LTO7
- B. LTO8
- C. LTO5
- D. LTO6
Answer: A
NEW QUESTION # 48
A customer runs their core application on an aging HPE 3PAR StoreServ 20000 Storage array. The application requires 100% availability.
Which HPE storage solution should you recommend?
- A. Primera
- B. MSA
- C. Nimble dHCI
- D. Nimble
Answer: A
NEW QUESTION # 49
A customer has a Nimble HF40 and needs to create a support ticket.
Click the option in the InfoSight portal where the customer can perform this task.
Answer:
Explanation:
NEW QUESTION # 50
You have just completed a performance analysis of an HPE 3PAR StoreServ 8400 disk array with different tiers at a customer's site. After reviewing the performance metrics, you determine that they should install a new tier of SSD drives.
Which actions should you recommend they take to fully optimize the array? (Choose two.)
- A. Configure Adaptive Optimization.
- B. Configure scheduled tunesys tasks.
- C. Configure Adaptive Flash Cache.
- D. Configure dedicated drives to enable Adaptive Flash Cache.
- E. Rebalance all flash drives between nodes 0 and 2.
Answer: A,B
NEW QUESTION # 51
A customer is a cloud service provider with infrastructure powered by HPE 3PAR Storeserv 9000.The customer is concern about their ability to ensure the quality of service and protect their tenants from unpredictable bursts of I/O from other tenants. What should you recommended to your customer ?
- A. Use adaptive optimization to optimize service level automatically
- B. Use virtual domain to automatically set multi-tenant policies
- C. Use priority optimization to enable service level for workloads
- D. Use dynamic optimization to automatically manage quality of service
Answer: C
NEW QUESTION # 52
Which storage principle would benefits of customer who has several departments in their organization with different storage needs?
- A. Multi-tenancy
- B. Scale out storage
- C. Federated storage
- D. Autonomic Management
Answer: A
NEW QUESTION # 53
A customer wants to expand his cascaded B-series based SAN but is concerned about latencies within the SAN backend. You recommend changing the topology to a full mesh.
Which switch feature will ensure that the latencies in the backend are at the lowest possible level?
- A. FSPF
- B. LACP
- C. NPIV
- D. VSF
Answer: A
NEW QUESTION # 54
A customer is planning to upgrade their HF40 controllers to support additional I/O requirements.
To which model can they upgrade to meet their new requirements?
- A. AF60
- B. AF40
- C. HF40C
- D. HF60
Answer: C
NEW QUESTION # 55
Which storage protocol is supported by virtual connect Flex-10?
- A. FCoE
- B. FCIP
- C. FC
- D. ISCSI
Answer: D
NEW QUESTION # 56
You are advising a customer on a new backup strategy to deploy HPE StoreOnce.
What should you recommend to ensure the best storage utilization and performance?
- A. size solution for a single backup device
- B. combine management and backup Ethernet traffic
- C. use separate backup targets for different data types
- D. consolidate activity windows for housekeeping tasks
Answer: D
NEW QUESTION # 57
Match the MSA architecture components with their descriptions.
Answer:
Explanation:
NEW QUESTION # 58
Match the feature to the appropriate C-Series DCNM license type.
Answer:
Explanation:
NEW QUESTION # 59
A customer's environment consists of two HPE Synergy frames running VMware vSphere, HPE FlexFabric 5700 switches, and one HPE Nimble HF-series array connected via 10GbE-T ports to the FlexFabric switches. The customer is concerned about performance management of the whole solution stack.
When using infosight with VMvision and analyzing end-to-end latency, which of the components within the stack are displayed? (Choose Three)
- A. host
- B. application
- C. ISCSI network(SAN)
- D. operating system
- E. Ethernet network (LAN)
- F. storage
Answer: A,B,C
NEW QUESTION # 60
A customer need to server 40TB via file protocols including SMB and FTP to a board range of client operating system in one location .security protocol dictate that data must be encrypted with FIPS 140-2 compliance. Which HPE storage solution you recommend?
- A. HPE StoreOnce 5500with data in fight encryption .
- B. HPE MSA 2052 storage with HPE StoreEasy 3850 Gateway
- C. HPE XP7 storage with encryption ready disk adapters
- D. HPE 3PAR 8200 using self-encrypting drive with 3PAR file persona
Answer: D
NEW QUESTION # 61
A customer successfully implemented an HPE Primera solution.
Which tool can be used to verify performance counters, such as IOPS, match customer requirements?
- A. OneView
- B. Primera on-node management GUI
- C. Recovery Manager Central
- D. NinjaCrawler
Answer: B
NEW QUESTION # 62
A customer needs a centralized solution for storing departmental data to be accessed by Windows-based laptops and other personal devices.
Which solution should you recommend?
- A. File-oriented storage, accessed over SMB
- B. Object storage, accessed over S3 connector
- C. Block storage, directly accessed over FC
- D. Block storage, directly accessed over SAS
Answer: D
NEW QUESTION # 63
Which storage feature is supported by both the HPE StoreVirtual and the HPE 3PAR StoreServ storage, and is a key differentiator of HPE storage solutions in the industry?
- A. virtual Copy
- B. Dynamic Optimization
- C. Network RAID
- D. Peer Motion
Answer: D
NEW QUESTION # 64
During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE SN6000B switches. Which port mode must be set enable communication between the switches?
- A. F_PORT
- B. N_PORT
- C. FL_PORT (WRONG)
- D. E_PORT (Correct)
Answer: D
NEW QUESTION # 65
A customer has the following requirements for a storage solution:
VMware environment
20 TB of standard business data
400 TB of video archive files
10 GB iSCSI connectivity
They are most concerned with the cost of the solution.
Which HPE storage solution offers the lowest cost while meeting the customer requirements?
- A. HPE MSA
- B. HPE SimpliVity
- C. HPE Nimble
- D. HPE Primera
Answer: D
NEW QUESTION # 66
A customer has a new Nimble CS3000 21T storage systems and is facing latency issues for his 2TB ERP database. What would be a design approach to solve this issue ?
- A. Perform controller upgrade to a Nimbel CS3000 storage systems
- B. Enable storage tiering on the system and map the volume to the new tier
- C. Add additional SSd drives as cache to the system and PIN the volume
- D. Change RAID of the drives to RAID -1and setup quality of services for the volume
Answer: C
NEW QUESTION # 67
You have proposed that a customer replace their legacy SAN switches with new ?-Series switches. They are concerned about the management of all the devices, so you have included SANnav in the proposal.
What are the benefits of SANnav that you should emphasize to this customer? (Choose two.)
- A. It runs in a dedicated JVM
- B. It provides a global View
- C. It runs in a browser
- D. It provides fine-grain visibility into Storage Fabrics (FC + Ethernet)
- E. It offers automated SPOCK validation
Answer: B,C
NEW QUESTION # 68
......
HPE0-J68 exam covers topics that are relevant to the most current HPE storage solutions, including storage design, management, performance, and troubleshooting. It tests your knowledge of both HPE hardware and software, including HPE 3PAR, HPE Nimble Storage, HPE StoreOnce, HPE SimpliVity, and HPE StoreVirtual, among others. Additionally, the exam covers topics such as data protection, disaster recovery, and multi-site solutions.
HPE0-J68 Exam Dumps - PDF Questions and Testing Engine: https://www.exam-killer.com/HPE0-J68-valid-questions.html
HPE0-J68 Dumps - The Sure Way To Pass Exam: https://drive.google.com/open?id=1ljirfeb9GNWv8rWcn1kvOW_6TYu8mz-c
