HP HPE0-J68 Test Engine Practice Test Questions, Exam Dumps
100% Free HPE0-J68 Daily Practice Exam With 178 Questions
NEW QUESTION 32
In an ISCSI based storage system Proof-Of-Concept project ,the customer is not satisfied with the performance of their video streaming application .What would you recommended to the customer to optimize the excisting environment?
- A. Enable jumbo frames on required components
- B. Consolidate the heterogeneous switches in the network
- C. Increase the switch buffer to buffer credits
- D. Enable hardware ISCSI initiator
Answer: A
NEW QUESTION 33
You have just completed a performance analysis of an HPE 3PAR StoreServ 8400 disk array with different tiers at a customer's site. After reviewing the performance metrics, you determine that they should install a new tier of SSD drives.
Which actions should you recommend they take to fully optimize the array? (Choose two.)
- A. Configure dedicated drives to enable Adaptive Flash Cache.
- B. Rebalance all flash drives between nodes 0 and 2.
- C. Configure scheduled tunesys tasks.
- D. Configure Adaptive Optimization.
- E. Configure Adaptive Flash Cache.
Answer: C,D
NEW QUESTION 34
Which storage tool in the storage assessment foundry provide data protection analysis?
- A. Ninja protected+ (318)
- B. Ninja Thin
- C. Ninja Stars
- D. NinjaCrawler
Answer: A
NEW QUESTION 35
During which event will HPE 3par Storeserv persistent port feature provide transparent and uninterrupted failover (Select two)
- A. Firmware upgrade
- B. Loss of full-mesh cluster interconnect
- C. Loss of persistent cache
- D. B-series SAN switch upgrades
- E. Node maintenance or failure
Answer: A,E
NEW QUESTION 36
Which storage principle would benefits of customer who has several departments in their organization with different storage needs?
- A. Federated storage
- B. Scale out storage
- C. Autonomic Management
- D. Multi-tenancy
Answer: D
NEW QUESTION 37
A customer need a backup solution to their virtualized environment .The backup solution must be agentless ,hypervise independent and integrated with HPE storage solutions. The solution must support Nimble snapshot and replication management. What products meets the customer requirement?
- A. Micro Focus Data Protector
- B. HPE storeOnce Recovery manager central
- C. Commvault Simpana Intellisnap
- D. Veem Backup and Replication
Answer: D
NEW QUESTION 38
Exhibit:
Which fabric design is shown?
- A. core-edge
- B. meshed
- C. cascaded
- D. single fabric
Answer: B
NEW QUESTION 39
Which 3PAR storeServ feature allow to host to continue I/O uninterrupted during a firmware update?
- A. Persistent Memory
- B. Peer persistence
- C. Persistent port (96)
Answer: C
Explanation:
D Persistent Cache
NEW QUESTION 40
A customer has a large deployment of HPE Synergy compute modules. HPE 3PAR StoreServ arrays, and HPE StoreOnce system in a single data center. They are concerned about the risk of data loss due to site disaster and seeks cost-effective offsite Disaster Recovery protection without the need to deploy a secondary site.
Which HPE solution should you recommend?
- A. HPE StoreOnce Catalyst
- B. HPE StoreOnce VSA
- C. HPE StoreOnce CloudBank
- D. HPE StoreOnce RMC
Answer: A
NEW QUESTION 41
A customer is implementing an SAP HANA environment and is looking for an alternative to an entirely in-memory database.
Which storage technology should you recommend?
- A. Intel Optane
- B. NVMe SSD
- C. SAS SSD
- D. NVMe SCM
Answer: A
NEW QUESTION 42
A customer needs to be manually map out preferred paths within a multi-switch fabric, based on application ,priority ,and topology, while allowing failover to a non-preferred path if the preferred path fails, Which B-series FC switch functionality should be used to provide this?
- A. Traffic isolation Zones
- B. Frame filtering
- C. Enhanced group management
- D. Quality of services
Answer: A
NEW QUESTION 43
A customer asks for an integrated solution for their remote office with All-Flesh storage and ease of management. Application-aware replication to their main office is an important requirement.
Which HPE solution component should you discuss with the customer first?
- A. HPE SimpliVity 380
- B. HPE Nimble CS1000 system
- C. HPE 3PAR StoreServ 8200
- D. HPE MSA 2052 Storage
Answer: A
NEW QUESTION 44
A customer need to implement a new SAN fabric for their growing environment .The new SAN should provide a high performance and port-efficient network with many-to-many connectivity .Because of changing requirement and the possible acquisition of another company in the near future. The customer cannot predit the I/O traffic pattern within the SAN .The customer also concerned about availability. Which type of SAN topology should you recommend?
- A. Core-edge fabric
- B. Single switch fabric
- C. Meshed fabric
- D. Cascaded fabric
Answer: C
NEW QUESTION 45
You deployed and configured an all-flash Nimble array. The customer wants to attach their Windows-based server to the array.
Which HPE tool can you use on the host server to make the integration easier?
- A. Connection Manager
- B. StorServe Management Console
- C. Channel bonding
- D. Centralized Management Console
Answer: A
NEW QUESTION 46
A customer is planning to connect a new HPE 3PAR StoreServ system to its existing Synergy based composable infrastructure via direct-attach.
Which tool would be used to manage the storage?
- A. HPE Synergy Image Streamer
- B. HPE SAN Network Advisor
- C. HPE Synergy Composer
- D. HPE InfoSight for 3PAR
Answer: C
NEW QUESTION 47
Which storage sizing tool, designed specifically for the HPE 3PAR StoreServ environment, shows the expected deduplication ratio based on actual data analysis of the customer's current environment?
- A. StoreVista
- B. NinjaCrawler
- C. NinjaThin
- D. NinjaStars
Answer: D
NEW QUESTION 48
What allows volume level data to be copied between an HPE 3PAR and an HPE store Virtual VSA?
- A. Recovery Manager central
- B. Store virtual Peer motion
- C. StoreServ Peer Motion
- D. HPE 3PAR Remote Copy
Answer: A
NEW QUESTION 49
Which storage feature is supported by both the HPE StoreVirtual and the HPE 3PAR StoreServ storage, and is a key differentiator of HPE storage solutions in the industry?
- A. Peer Motion
- B. Network RAID
- C. virtual Copy
- D. Dynamic Optimization
Answer: A
NEW QUESTION 50
A customer has completely virtualized their datacenter with VMware. You propose a SimpliVity solution to replace their aging hardware.
Which SimpliVity features should you emphasize in your presentation? (Choose two.)
- A. It utilizes a unified ASIC for performance
- B. It provides S3 file access
- C. It utilizes the Storage Management Utility for management and monitoring
- D. It uses native hypervisor management tools for management
- E. It includes deduplication and backup capabilities
Answer: C,E
NEW QUESTION 51
......
Use Valid New HPE0-J68 Test Notes & HPE0-J68 Valid Exam Guide: https://www.exam-killer.com/HPE0-J68-valid-questions.html
HPE0-J68 exam torrent HP study guide: https://drive.google.com/open?id=1mvy4B0F9XsE68f87FEI4gTlpE0uFx9_P
