[Jan 14, 2023] HPE0-V15 Test Engine files, HPE0-V15 Dumps PDF
Latest HP HPE0-V15 PDF and Dumps (2023) Free Exam Questions Answers
HP HPE0-V15 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 19
Refer to the exhibits.
A customer is growing rapidly, and they need to add as many drives as possible to their MSA 2052 array. You created the original configuration. How many drives can be added to the customer array? (Select two)
- A. 24 SFF drives
- B. 24 LFF drives
- C. 12 LFF drives
- D. 12 SFF drives
- E. 48 SFF drives
Answer: A,D
NEW QUESTION 20
Read the question, and then refer to the exhibit.
<Switch-A>display int Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK SFP_PLUS 10Gbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10 VLAN permitted: 10 Trunk port encapsulation: IEEE 802.1q Port priority: 0 <SNIP> An administrator connected a hypervisor to interface Ten-Gigabit Ethernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. These VLANs are configured to be tagged on the hypervisor.
The administrator found that all the virtual machines within VLAN 20 can communicate with each other, but not to any resource on VLAN 20 outside the hypervisor.
What must you do to resolve this issue?
- A. Configure the PVID of the interface to be VLAN 20.
- B. Configure the interface as an access port.
- C. Permit VLAN 20 on the interface.
- D. Configure the interface as an IRF port.
Answer: C
NEW QUESTION 21
A customer recently installed a VMware environment with HPE ProLiants, HPE MSA storage, and Aruba switches.
What should you recommend to the customer to manage their support contracts with HPE?
- A. HPE InfoSight
- B. Service Pack for ProLiant
- C. HPE Recovery Manager Central
- D. HPE Insight Online
Answer: D
NEW QUESTION 22
Which HPE Proliant server should you recommend for a home office environment where the server will be located in the same office as the user?
- A. HPE ML110
- B. HPEXL170r
- C. HPE MicroServer
- D. HPE DL20
Answer: A
NEW QUESTION 23
In which protocol are REST API requests transported?
- A. CRUD
- B. SOAP
- C. SSH
- D. HTTP
Answer: D
NEW QUESTION 24
When configuring a single ProLiant Gen10 server, which embedded tool can be used to deploy a reliable and consistent configuration?
- A. HPE iLO Amplifier Pack
- B. Intelligent Provisioning
- C. HPE OneView
- D. Smart Update Manager
Answer: B
NEW QUESTION 25
A customer needs to add storage capacity to a host In a remote branch office. They have limited IT resources, so the solution requires ease of integration at a low price point Which HPE Storage family best meets these needs?
- A. HPE D3000 Enclosure
- B. HPE 3PAR StoreServ
- C. HPE MSA Storage Array
- D. HPE NimbIe Storage
Answer: C
NEW QUESTION 26
A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.
Answer:
Explanation:
NEW QUESTION 27
A customer needs to deploy an application on a newly-installed HPE ProLiant server, but they report that the server is not online. They call you for remote support. The IP address on the production network cannot be reached. You are evaluating the probable root causes of this issue.
According to the troubleshooting methodology, what are next two steps? (Select two)
- A. Use Microsoft Remote Desktop or VNC to check the server's NIC and IP address configuration
- B. Use OneView to see f the server firmware is up-to-date
- C. Run insight Diagnostics on the Server
- D. Remote console into the ToR switch to check the server's port configuration.
- E. Log in to iLO to see if the server hardware and NIC are online and configured correctly.
Answer: C,E
NEW QUESTION 28
You configured a port on an HPE FiexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs interface Ten-GigabitEthernet 1/0/11 description server ESXiOl-ethl port link-type trunk port trunk permit vlan 50 port trunk permit vlan 2 port trunk pvid vlan 50 Given the configuration above, what should happen to any untagged traffic coming from the VMware ESXI host?
- A. It will be transmitted in vlan 1.
- B. It will be dropped
- C. It will be transmitted in vlan 50.
- D. It will be transmitted in vlan 2
Answer: B
NEW QUESTION 29
What is used to identify a storage HBA port in a Fibre Channel SAN fabric?
- A. MAC Address
- B. SCSI ID
- C. WWN
- D. ION
Answer: C
NEW QUESTION 30
A local state college is implementing a new VDI cluster to support computer and testing labs. They have the following requirements:
Three VMware ESXi Hosts, each with one AMD processor, 1 TB of RAM, 16 Gbps FC Dual Port HBA.
HPE Nimble AF20 with 17 TB usable capacity.
Integration into an existing HPE FlexFabric 5710 and HPE SN3000B Fibre Channel SAN switches.
The solution must fit in 7U of rack space. If the customer needs more capacity in the future, they will use scale-out growth.
Which server model should you recommend to this client?
- A. HPE DL385
- B. HPE DL360
- C. HPE DL380
- D. HPE DL325
Answer: C
NEW QUESTION 31
You need to change BIOS configuration settings without rebooting a server.
Which system utility should you use?
- A. intelligent Provisioning
- B. Lights-Out Online Configuration utility
- C. smart Storage Administrator
- D. Intelligent Management Center
Answer: A
NEW QUESTION 32
A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports.
They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating.
Which architecture meets the customer requirements?
- A. One VSX stack of two Aruba 8320 48-port 1/10GBASE-X SFP+ switches with the following: 14 10GBASE-T transceivers in each switch
10 SFP+ to SFP+ DACs in each switch Two QSFP+ to Quad SFP+ adapters - B. One VSX stack of two Aruba 8325 48-port 1/10GBASE-X SFP+ switches with the following: 14 10GBASE-T transceivers in each switch
10 SFP+ to SFP+ DACs in each switch - C. One IRF stack of two HPE 5945 48-port 1/10GBASE-X SFP+ switches with the following: 14 10GBASE-T transceivers in each switch
10 SFP+ to SFP+ DACs in each switch - D. One IRF stack of wo HPE 5945 2-Slot switches each with the following: One 24-Port SFP28 + 2-Port QSFP28 module One 24-Port 1/10GBASE-T + 2-Port QSFP+ module 10 SFP+ to SFP+ DACs in each switch
Answer: C
NEW QUESTION 33
Which network protocol is used to build a loop-free logical topology for Ethernet networks?
- A. VLAN
- B. SCSP
- C. ECP
- D. STP
Answer: D
NEW QUESTION 34
A system administrator is performing the BIOS/Platform configuration of a DL380 Gen10 servers You notice the amber health LED.
The health status of which solution components can be verified with embedded UEFI Diagnostics? {Select two.)
- A. Processor
- B. Power Supplies
- C. FC HBA
- D. iLONAND
- E. Primera node
Answer: A,D
NEW QUESTION 35
A customer is implementing a redundant AD servers to support then lab environment .They have the following requirements
* four rack servers, each with 2 CPUs from AMD. at least 256GB of RAM. FC Dual Port hba
* HPE Nimble AF20 with 17TB useable capacity
* integration into their existing HEP FlexFabric 57io and HPE SN3000B Fibre Channel SAN switches.
it the customer needs more capacity in the future, they will use scale-out growth Which server model should you recommend to this client?
- A. Proliant DL 385 Gen10
- B. ProLiant DL 325 Gen10
- C. ProLiant DL 360 Gen 10
- D. ProLiant DL SGOGen10
Answer: B
NEW QUESTION 36
Which storage array feature records only changes made to the base volume and keeps an earlier state of the original volume?
- A. virtual volume
- B. volume mirror
- C. snapshot
- D. clone
Answer: C
NEW QUESTION 37
A customer with limited IT administration resources needs a complete HPE server, storage, and networking solution. The solution must be able to be deployed in an hour or less through a simple, wizard-based setup. They want to manage the HPE solution through a simple, integrated plug-in to vCenter, since their IT staff members are already familiar with vCenter.
Which HPE solution best meets the customer requirements?
- A. HPE ConvergedSystem 750
- B. HPE Nimble Storage dHCI
- C. HPE OneView for VMware vCenter
- D. HPE Proliant for Microsoft Azure Stack
Answer: A
Explanation:
https://support.hpe.com/hpesc/public/docDisplay?docId=a00105348en_us&docLocale=en_US
NEW QUESTION 38
A customer is subject to regulatory requirements and their data is highly sensitive.
Which HPE Smart Array feature addresses their need for an level of security for data stored inside their server?
- A. Rapid Parity Initialization
- B. SmartCache
- C. Smart Battery backed-up write-cache
- D. Secure Encryption
Answer: D
NEW QUESTION 39
For which virtualization management products does HPE OneView offer integration plug-ins1? (Select two.)
- A. VMware vCenter
- B. Nutanix Prism infrastructure Manager
- C. Citrix XenCenter
- D. Red Hat Enterprise Virtualization Manager
- E. Microsoft System Center
Answer: A,E
NEW QUESTION 40
What is the correct cable type to use when connecting a server to a switch using 10 Gbps Short Range (SR) SFP+ optical connections?
- A. Multi-mode Fiber
- B. Direct Attach Cable (DAC)
- C. Twin-Ax
- D. Single Mode Fiber
Answer: D
NEW QUESTION 41
......
Pass Your HPE ATP - Hybrid IT Solutions V2 HPE0-V15 Exam on Jan 14, 2023 with 82 Questions: https://www.exam-killer.com/HPE0-V15-valid-questions.html
HPE0-V15 Free Exam Study Guide! (Updated 82 Questions): https://drive.google.com/open?id=1kQqTrv2al_I81km9--E1SCcRBrhJmYTt
