Verified 300-425 Exam Dumps PDF [2021] Access using Exam-Killer
Try Best 300-425 Exam Questions from Training Expert Exam-Killer
Details of Cisco 300-425 Exam
Cisco 300-425 is a 90-minute exam covering about 65 questions that have to be completed within this allocated time. The questions can be expected in various formats, for example, multiple choice, testlets, drag and drop, or fill-in-the-blank. To get the associated certifications, the students have to gain the passing score of at least 750 points on a scale of 1000. The test can be taken in the Japanese and English languages and the learners can choose the appropriate option during the registration process. To register for and schedule the 300-425 ENWLSD exam, the candidates must go through the Pearson VUE platform and pay the fee of $300. The details of this process can be found on the official website. This payment allows you to opt for the online testing or in-person delivery. With the first variant, the individuals can have the exam from any comfort place at any time, while the in-person option gives them the opportunity to take it at one of the Pearson VUE centers.
NEW QUESTION 53
Which Cisco VPN technology can use multipoint tunnel, resulting in a single GRE tunnel interface on the hub, to support multiple connections from multiple spoke devices?
- A. DMVPN
- B. Cisco Easy VPN
- C. GETVPN
- D. FlexVPN
Answer: A
NEW QUESTION 54
Two cisco 5520 wireless LAN controllers are managing all access points throughout the network. The WLCs are in different locations to provide geographical redundancy a mobility group has been configured on both WLCs and has a UP status on both controllers. The Aps in location A are statically configured to use controller A as the primary and controller B as the secondary. If the WLC in location A goes offline. The Aps successfully join the WLC in location, but they do not fail over to their primary configured controller. Which configuration task fixes the issue?
- A. Enable AP fallback globally on the WLC
- B. Use DHCP Option 43 and specify WLC in location A as primary.
- C. Change the AP Failover Priority to critical.
- D. Configure the WLC in location A as primary using the CAPWAP AP Controller IP Address command on all the location A Access points.
Answer: D
NEW QUESTION 55
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP phones. Which dBm range is the network inspected against?
- A. -85 to -67 dBm
- B. -78 to -65 dBm
- C. -85 to -65 dBm
- D. -72 to -67 dBm
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/34/user/guide/bk_CiscoPrimeInfrastructur minimum is -90 and maximum is -67 for IP phone
NEW QUESTION 56
A network engineer is working on a design for a wireless network that must support data, voice, and location services. To support these services, which access point placement must the engineer use?
- A. perimeter only
- B. corner only
- C. indoor and outdoor
- D. perimeter and corner
Answer: D
Explanation:
NEW QUESTION 57
Which two criteria must be considered when conducting an outdoor bridge site survey? (Choose two.)
- A. near-far effect
- B. Fresnel zone
- C. power lines
- D. weather
- E. traffic lights
Answer: A,C
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidel
NEW QUESTION 58
Refer to the exhibit.
What is the main reason why the Wi-Fi design engineer took a different approach than installing the APs in the offices, even though that installation provides better coverage?
- A. antenna gain
- B. transmit power considerations
- C. aesthetics
- D. power supply considerations
Answer: B
Explanation:
Explanation
https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/RFDesign.html#wp1000551
NEW QUESTION 59
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP phones. Which dBm range is the network inspected against?
- A. −85 to −65 dBm
- B. −72 to −67 dBm
- C. −85 to −67 dBm
- D. −78 to −65 dBm
Answer: C
Explanation:
Section: Wireless Site Survey
NEW QUESTION 60
An engineer is designing an outdoor mesh network to cover several sports fields. The core of the network is located In a building at the entrance of a sports complex Which type of antenna should be used with the RAP for backhaul connectivity?
- A. 2.4 GHz. B-dBi patch antenna
- B. 2 4 GHz. 14-dBi omnidirectional antenna
- C. 5 GHz. 8-dBi omnidirectional antenna
- D. 5 GHz. 14-dBi patch antenna
Answer: C
Explanation:
The AP1524PS includes three radios: a 2.4 -GHz, a 5.8- GHz, and a 4.9-GHz radio. The 2.4-GHz radio is for client access (non- public safety traffic) and the 4.9-GHz radio is for public safety client access traffic only. The 5.8-GHz radio can be used as the backhaul for both public safety and non-public safety traffic.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-6/configuration-guide/b_cg76/ b_cg76_chapter_010000001.html
NEW QUESTION 61
Which three pieces of equipment are needed to conduct a fully measured wireless survey? (Choose three.)
- A. PoE battery
- B. tall tripod
- C. ladder
- D. spirit level
- E. goggles
- F. access point
Answer: A,B,F
Explanation:
Section: Wireless Site Survey
NEW QUESTION 62
A network engineer is working on a predictive WLAN design, the new wireless network must support access to Internet, email, voice, and the inventory database, to successfully support these services, which configuration must the engineer use for the signal strength levels and SNR on the planning tool?
- A. signal strength of -67 dBm, 25-dB SNR, and maximum 1 percent packet loss.
- B. signal strength of 67 dBm, 20-dB SNR, and maximum 1 percent packet loss.
- C. signal strength of-70 dBm,30-dB SNR. and maximum 10 percent packet loss.
- D. signal strength of -67 dBm, 20-dB SNR, and maximum 5 percent, packet loss.
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057site-survey-gu
NEW QUESTION 63
A wireless engineer must optimize RF performance for multiple buildings with multiple types of construction and user density. Which two actions must be taken? (Choose two.)
- A. Enable DTPC on the network.
- B. Configure RF profiles for each area type.
- C. Configure WMM profiles for each building.
- D. Configure AP groups for each area type.
- E. Configure FlexConnect groups for each building.
Answer: B,D
NEW QUESTION 64
Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of controllers is up and connected?
- A. eping
- B. ping
- C. mping
- D. rping
Answer: B
Explanation:
NEW QUESTION 65
Prior to enabling PPPoE in a virtual private dialup network group, which task must be completed?
- A. Disable CDP on the interface.
- B. Enable QoS FIFO for PPPoE support.
- C. Execute the vpdn enable command.
- D. Execute the no switchport command.
Answer: C
Explanation:
Enabling PPPoE in a VPDN Group
Perform this task to enable PPPoE in a virtual private dial-up network (VPDN) group.
Restrictions
This task applies only to releases prior to Cisco IOS Release 12.2(13)T.
SUMMARY STEPS
1. enable
2. configure terminal
3. vpdn enable
4. vpdn-group name
5. request-dialin
6. protocol pppoe
DETAILED STEPS
Reference: http://www.cisco.com/en/US/docs/ios/12_2t/12_2t2/feature/guide/ ftpppoec_support_TSD_Island_of_Content_Chapter.html
NEW QUESTION 66
Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?
- A. UDP 16666 for control plane, EoIP (IP protocol 97) for data plane
- B. UDP 16668 for control plane, UDP 16667 for data plane
- C. UDP 16666 for control plane, UDP 16667 for data plane
- D. UDP 16667 for control plane, UDP 16666 for data plane
Answer: C
Explanation:
NEW QUESTION 67
A university is in the process of designing a wireless network in an auditorium that seats 500 students and supports student laptops. Which design methodology should the university implement in the auditorium?
- A. roaming design model
- B. high-density design model
- C. voice design model
- D. location design model
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 68
......
The Cisco 300-425 test entails the creation of Cisco wireless networks for the enterprise. You pick it from six tests known as concentration. On its own, such an exam helps in coming by the Cisco Certified Specialist-Enterprise Wireless Design certification. Also, since it comes after the core 350-401 test, succeeding in it means you get to possess the CCNP Enterprise certificate.
Latest 100% Passing Guarantee - Brilliant 300-425 Exam Questions PDF: https://www.exam-killer.com/300-425-valid-questions.html
Practice Examples and Dumps & Tips for 2021 Latest 300-425 Valid Tests Dumps: https://drive.google.com/open?id=1kv23bnLmB7JFZcEmveoln-Yl58864xHm
