HPE6-A70 Free Update With 100% Exam Passing Guarantee [2021]
[Oct-2021] Verified HP Exam Dumps with HPE6-A70 Exam Study Guide
NEW QUESTION 28
A company plans to deploy a Mobility Master (MM). The MM will manage 50 Mobility Controller (MC) appliances that will control a total of 700 APs, and 10 Virtual Mobility Controllers (VMCs) that will control a total of 200 APs.
How many MM licenses does the company require?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation
Starting with ArubaOS 8.0.1, the MM license is required to terminate devices (controllers or APs) on Mobility Master. If the Mobility Master does not have sufficient MM licenses and an AP fails to obtain a license, that AP can get an IP address and connect to its controller, but will not broadcast an SSID.
NEW QUESTION 29
A company plans to deploy a Mobility Master (MM) solution with two MM nodes. The MM solution will manage 10 Mobility Controller (MC) appliances that will control a total of 400 APs.
How should the network administrator install the AP licenses?
- A. 400 AP licenses on the MM and no licenses on the MC
- B. 40 AP licenses on the MM and no licenses on the MC
- C. 800 AP licenses on the MM and 40 AP licenses on each MC
- D. 800 AP licenses on each MC and no licenses on the MC
Answer: A
NEW QUESTION 30
A customer has a large campus that requires 400 Aruba 335 APs to support a total of 20,000 wireless users and
12Gbps of traffic. Although the customer wants two controllers for redundancy, each controller must be able to support all of the APs and users on its own.
Which Aruba Mobility Controller models meet the customer requirements and DO NOT unnecessarily exceed them?
- A. Aruba 7024 controllers
- B. Aruba 7210 controllers
- C. Aruba 7240 controllers
- D. Aruba 7030 controllers
Answer: B
NEW QUESTION 31
Which deployment option for Aruba Controllers is new to ArubaOS 8?
- A. deployment in master-local mode
- B. deployment as virtual appliances
- C. deployment in standalone mode
- D. deployment as branch office controller
Answer: B
NEW QUESTION 32
Which authentication server option would the network administrator choose to authenticate a wireless user directly against an Active Directory (AD) domain controller without NPS or IAS?
- A. RFC 3576 server
- B. LDAP server
- C. RADIUS server
- D. TACACS server
Answer: C
NEW QUESTION 33
Which authentication server option would the network administrator choose to authenticate a wireless user directly against an Active Directory (AD) domain controller without NPS or IAS?
- A. LDAP server
- B. RFC 3576 server
- C. RADIUS server
- D. TACACS server
Answer: A
NEW QUESTION 34
Which improvement does ArubaOS 8 offer for the Client Match feature?
- A. It enables the application of unique CM rules for specific client types.
- B. It checks the compliance posture for Bring Your Own Device (BYOD) endpoints to improve security.
- C. It checks client behavior against a wider array of rules to detect more DoS attacks and intrusion attempts.
- D. It offloads client load balancing decisions to local controllers.
Answer: D
NEW QUESTION 35
What is an advantage for a network administrator to use AirWave over a Mobility Master (MM)?
- A. scans wireless client settings and brings those settings in compliance with corporate security policies.
- B. ability to gather and analyze historical user data, and monitor client association and network usage trends
- C. provides realtime firewall hits for client network troubleshooting
- D. ability to monitor and manage a Mobility Controller (MC) to configure the WLAN
Answer: B
NEW QUESTION 36
Refer to the exhibits.
Exhibit 1
Exhibit 2
An Aruba solution supports a WLAN that uses WPA2-Enterprise security. Exhibit 1 shows the AAA policy for the WLAN. Users are supposed to be assigned to different roles after authentication. Network administrators test a connection with the employee user account. Exhibit 2 shows the status for the client after this test.
What is a possible reason for the issue shown in Exhibit 2?
- A. MAC authentication is enabled on the WLAN, and the test device does not have an authorized address.
- B. The shared key configured for the ClearPass server is incorrect.
- C. The RADIUS server is not correctly set up to send a user role for the employee account.
- D. The administrators entered the wrong password for the employee account.
Answer: C
NEW QUESTION 37
Refer to the exhibit.
The exhibit shows output from a Mobility Master (MM) dashboard. What does the health status indicate?
- A. The maximum data rate that 802.11ac supports is about twice as high as the data rate the client uses.
- B. The client device only complies with about half of the rules in the endpoint health policy.
- C. About half of the heartbeats the client sends reaches the Mobility Manager (MM).
- D. It takes the AP about twice as long to send data to the client as expected if all transmissions succeeded.
Answer: D
NEW QUESTION 38
Refer to the exhibit.
What is a valid way to help the APs discover devices that can control them?
- A. Specify the Mobility Master (MM) IP address in DHCP option 43 on the network DHCP server.
- B. Set up an Aruba Central subscription, and ensure that APs can reach the Internet.
- C. Map the Mobility Controller (MC) IP addresses to the aruba-master name on the network DNS server.
- D. Enable CPSec, and ensure the Mobility Master (MM) and Mobility Controllers (MCs) trust the Aruba certificates installed on the APs at the factory.
Answer: C
NEW QUESTION 39
A company has an Aruba Mobility Master (MM)-based solution. A network administrator wants to collect and analyze information about clients and access points (APs) over extended periods of time.
What should the administrator do to achieve this goal?
- A. Enable archival from the MM interface Maintenance windows.
- B. Make sure that MM has sufficient AppRF licenses.
- C. Add Aruba AirWave to the solution.
- D. Run a Traffic Analysis report on the MM.
Answer: C
NEW QUESTION 40
What is the difference between how a network administrator can monitor clients in the Mobility (MM) interface and in the AirWave Management Platform?
- A. AirWave combines information from more sources, such as RADIUS authenticating servers and APs.
- B. AirWave shows trends for the past several minutes, while MM shows longer trends.
- C. MM shows user and role information associated with clients, while AirWave does not.
- D. AirWave shows the current signal level for the client connection, while MM does not show RF statistics.
Answer: A
NEW QUESTION 41
A WLAN in an Aruba Mobility Master (MM)-based solution uses WPA2-Enterprise security. This WLAN currently authenticates users to Active Directory (AD), and users log in with their Windows domain credentials.
Network administrators now want to authenticate the Windows clients as well, based on the client Computer Names.
What should the administrator do on MM to achieve this goal?
- A. Set up MAC Authentication on the WLAN.
- B. Bind individual Mobility Controllers (MCs) to AD at the device level.
- C. Set up Machine Authentication on the WLAN.
- D. Import the computer names from AD to the MM internal database.
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 42
A company has an Aruba solution. The company wants to host a guest login portal with this solution, and the login portal must gie guests the option to create their own login accounts.
How can a network administrator help meet these criteria?
- A. Disable authentication in the captive portal profile for the guest WLAN.
- B. Make sure to create a guest provisioning account for the guest WLAN.
- C. Choose the Internal captive portal with email registration option for the guest WLAN.
- D. Choose ClearPass or the other external captive portal option for the guest WLAN.
Answer: D
NEW QUESTION 43
A network administrator reduces an AP radio transmit power from 18 dBm to 15 dBm. This is a loss of 3 dBms.
What is the current power as a percentage of the original power?
- A. 83%
- B. 50%
- C. 10%
- D. 33%
Answer: B
NEW QUESTION 44
A network administrator needs to configure firewall rules for three roles:
* Finance
* Sales
* Employee
Several rules apply to both the Employee and Sales roles, but not to the Finance role. What is the simplest way to configure these rules?
- A. Create a policy with these rules, and then apply that policy to the Employee and Sales roles.
- B. Select either the Employee or Sales role, and then configure these rules within the global policy.
- C. Define the Employee and Sales roles as internal roles, and then configure the rules as global rules for internal users.
- D. Apply these rules as a subnet-based policy, and then ensure that only Employee and Sales users are assigned IP addresses in that subnet.
Answer: A
NEW QUESTION 45
......
Authentic Best resources for HPE6-A70 Online Practice Exam: https://www.exam-killer.com/HPE6-A70-valid-questions.html
HPE6-A70 Test Engine Practice Exam: https://drive.google.com/open?id=1PBIIWjEcP78nwJdyta6qoE81Iyx8KZJp
