May-2024 Download Free Latest Exam NSE7_SDW-7.0 Certified Sample Questions
Prepare for your exam certification with our NSE7_SDW-7.0 Certified Fortinet
NEW QUESTION # 29
Refer to the exhibit.
Which conclusion about the packet debug flow output is correct?
- A. The original traffic exceeded the maximum bandwidth of the outgoing interface, and the packet was dropped.
- B. The reply traffic exceeded the maximum bandwidth configured in the traffic shaper, and the packet was dropped.
- C. The original traffic exceeded the maximum packets per second of the outgoing interface, and the packet was dropped.
- D. The original traffic exceeded the maximum bandwidth configured in the traffic shaper, and the packet was dropped.
Answer: D
NEW QUESTION # 30
Which components make up the secure SD-WAN solution?
- A. Datacenter, branch offices, and public cloud
- B. Telephone, ISDN, and telecom network.
- C. Application, antivirus, and URL, and SSL inspection
- D. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy
Answer: D
NEW QUESTION # 31
Which two statements about SD-WAN central management are true? (Choose two.)
- A. It uses templates to configure SD-WAN on managed devices.
- B. The objects are saved in the ADOM common object database.
- C. It does not support meta fields.
- D. It supports normalized interfaces for SD-WAN member configuration.
Answer: A,B
Explanation:
Explanation
Normalized interfaces are not supported for SD-WAN templates. You can create multiple SD-WAN zones and add interface members to the SD-WAN zones. You must bind the interface members by name to physical interfaces or VPN interfaces.https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan-new-features/794804/new-sd-wan-template-
NEW QUESTION # 32
What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process? (Choose two.)
- A. The zero-touch provisioning process has completed internally, behind FortiGate.
- B. A factory reset performed on FortiGate.
- C. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager
- D. FortiGate has obtained a configuration from the platform template in FortiGate cloud.
- E. The FortiGate cloud key has not been added to the FortiGate cloud portal.
Answer: A,E
NEW QUESTION # 33
Which two performance SLA protocols enable you to verify that the server response contains a specific value? (Choose two.)
- A. dns
- B. http
- C. icmp
- D. twamp
Answer: A,B
Explanation:
Pages 85,86 in Study guide 7.0 Pages 100,101 in Study guide 7
NEW QUESTION # 34
Refer to the exhibit.
In a dual-hub hub-and-spoke SD-WAN deployment, which is a benefit of disabling the anti-replay setting on the hubs?
- A. It instructs the hub to disable TCP sequence number check, which is required for TCP sessions originated from spokes to fail over back and forth between the hubs.
- B. It instructs the hub to not check the ESP sequence numbers on IPsec traffic, to improve performance.
- C. It instructs the hub to skip content inspection on TCP traffic, to improve performance.
- D. It instructs the hub to disable the reordering of TCP packets on behalf of the receiver, to improve performance.
Answer: A
NEW QUESTION # 35
What are two common use cases for remote internet access (RIA)? (Choose two.)
- A. Centralize security inspection on the hub
- B. Provide thorough inspection on spokes
- C. Provide internet access through the hub
- D. Provide direct internet access on spokes
Answer: A,C
NEW QUESTION # 36
Refer to the exhibit.
Based on the exhibit, which two statements are correct about the health of the selected members? (Choose two.)
- A. FortiGate can offload the traffic that is subject to passive monitoring to hardware.
- B. FortiGate passively monitors the member if TCP traffic is passing through the member.
- C. After FortiGate switches to active mode, FortiGate never fails back to passive monitoring.
- D. During passive monitoring, FortiGate can't detect dead members.
Answer: B,D
NEW QUESTION # 37
Refer to the exhibits.
Exhibit A shows the packet duplication rule configuration, the SD-WAN zone status output, and the sniffer output on FortiGate acting as the sender. Exhibit B shows the sniffer output on a FortiGate acting as the receiver.
The administrator configured packet duplication on both FortiGate devices. The sniffer output on the sender FortiGate shows that FortiGate forwards an ICMP echo request packet over three overlays, but it only receives one reply packet through T_INET_1_0.
Based on the output shown in the exhibits, which two reasons can cause the observed behavior? (Choose two.)
- A. On the sender FortiGate, duplication-max-num is set to 3.
- B. The ICMP echo request packets received over T_INET_0_0 and T_MPLS_0 were offloaded to NPU.
- C. On the receiver FortiGate, packet-de-duplication is enabled.
- D. The ICMP echo request packets sent over T_INET_0_0 and T_MPLS_0 were dropped along the way.
Answer: A,C
NEW QUESTION # 38
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows the traffic shaping policy and exhibit B shows the firewall policy.
The administrator wants FortiGate to limit the bandwidth used by YouTube. When testing, the administrator determines that FortiGate does not apply traffic shaping on YouTube traffic.
Based on the policies shown in the exhibits, what configuration change must be made so FortiGate performs traffic shaping on YouTube traffic?
- A. Destination internet service must be enabled on the traffic shaping policy.
- B. Individual SD-WAN members must be selected as the outgoing interface on the traffic shaping policy.
- C. Web filtering must be enabled on the firewall policy.
- D. Application control must be enabled on the firewall policy.
Answer: D
NEW QUESTION # 39
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set priority 10.
- B. Set load-balance-mode source-ip-ip-based.
- C. Set source 100.64.1.1.
- D. Set cost 15.
Answer: A,D
NEW QUESTION # 40
Refer to the exhibits.
Which two statements about the IPsec VPN configuration and the status of the IPsec VPN tunnel are true? (Choose two.)
- A. FortiGate does not install IPsec static routes for remote protected networks in the routing table.
- B. FortiGate facilitated the negotiation of the T_INET_1_0_0 ADVPN shortcut over T_INET_1_0.
- C. Dead peer detection is disabled.
- D. The phase 1 configuration supports the network-overlay setting.
Answer: A,D
NEW QUESTION # 41
Which two statements about the SD-WAN zone configuration are true? (Choose two.)
- A. An SD-WAN member can belong to two or more zones.
- B. You can delete the default zones.
- C. The default zones are virtual-wan-link and SASE.
- D. The service-sla-tie-break setting enables you to configure preferred member selection based on the best route to the destination.
Answer: C,D
NEW QUESTION # 42
Refer to the exhibits.
Exhibit A -
Exhibit B -
Exhibit A shows a site-to-site topology between two FortiGate devices: branch1_fgt and dc1_fgt. Exhibit B shows the system global and system settings configuration on dc1_fgt.
When branch1_client establishes a connection to dc1_host, the administrator observes that, on dc1_fgt, the reply traffic is routed over T_INET_0_0, even though T_INET_1_0 is the preferred member in the matching SD-WAN rule.
Based on the information shown in the exhibits, what configuration change must be made on dc1_fgt so dc1_fgt routes the reply traffic over T_INET_1_0?
- A. Enable snat-route-change under config system global.
- B. Disable tcp-session-without-syn under config system settings.
- C. Disable allow-subnet-overlap under config system settings.
- D. Enable auxiliary-session under config system settings.
Answer: D
Explanation:
Controlling return path with auxiliary session When multiple incoming or outgoing interfaces are used in ECMP or for load balancing, changes to routing, incoming, or return traffic interfaces impacts how an existing sessions handles the traffic. Auxiliary sessions can be used to handle these changes to traffic patterns.https://docs.fortinet.com/document/fortigate/7.0.11/administration-guide/14295/controlling-return-path-with-auxiliary-session
NEW QUESTION # 43
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set priority 10.
- B. Set load-balance-mode source-ip-ip-based.
- C. Set source 100.64.1.1.
- D. Set cost 15.
Answer: A,D
NEW QUESTION # 44
Refer to the exhibit, which shows the IPsec phase 1 configuration of a spoke.
What must you configure on the IPsec phase 1 configuration for ADVPN to work with SD-WAN?
- A. You must enable auto-discovery-sender.
- B. You must disable idle-timeout.
- C. You must enable net-device.
- D. You must set ike-version to 1.
Answer: C
NEW QUESTION # 45
Refer to the exhibits.
Exhibit A
Exhibit B -
Exhibit A shows the configuration for an SD-WAN rule and exhibit B shows the respective rule status, the routing table, and the member status.
The administrator wants to understand the expected behavior for traffic matching the SD-WAN rule.
Based on the exhibits, what can the administrator expect for traffic matching the SD-WAN rule?
- A. The traffic will be routed over T_MPLS_0.
- B. The traffic will be routed over T_INET_0_0.
- C. The traffic will be load balanced across all three overlays.
- D. The traffic will be routed over T_INET_1_0.
Answer: A
NEW QUESTION # 46
......
Free Fortinet NSE7_SDW-7.0 Exam 2024 Practice Materials Collection: https://www.exam-killer.com/NSE7_SDW-7.0-valid-questions.html
NSE7_SDW-7.0 Exam Info and Free Practice Test All-in-One Exam Guide May-2024: https://drive.google.com/open?id=1BSvTrI1fXogebm7iDykIPySmVAsG26mw
