Juniper JN0-362 Practice Exam - 67 Unique Questions
Latest Questions JN0-362 Guide to Prepare Free Practice Tests
JN0-362 Exam topics
Candidates must know the topics before they start of preparation because it will really help them solving the problems. Our JN0-362 practice test and CAU-305 practice exams will include the following topics. These are covered in our JN0-362 exam dumps.
Understanding functional and technical aspects of Open Shortest Path First (OSPF)
The following will be discussed in JN0-362 exam dumps:
- Adjacencies and neighbors
- Link-state database
- OSPF area and router types
- Routing policy application
- Identify the concepts, operation, or functionality of OSPF
- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
- Additional basic options
- Designated router and backup designated router
- Areas, interfaces and neighbors
- Troubleshooting tools
- OSPF packet types
How to study the JN0-362 Exam
A solid foundation on Multiprotocol Label Switching (MPLS) is required. After beginner concepts such as MPLS forwarding and the structure of the MPLS header, you should learn into the configuration and operation of the two main label distribution protocols, RSVP and LDP. Give special emphasis to the central topics of traffic engineering and MPLS traffic protection, including fast reroute, link/node protection, and LDP loop-free alternate. Put into practice with a series of in-depth hands-on labs, which will allow candidate to gain experience in configuring and monitoring MPLS on Junos OS devices. Utilize Juniper Networks vMX Series devices using the Junos OS Release 16.1R3.10, but are also applicable to other MX Series devices.JN0-362 practice exams provides detailed resources and items on the JN0-362 exam. The JN0-362 exam dumps will help you identify the content and difficulty level of the questions and the practice Exams will make you familiar with the format and environment of an exam. You should refer this JN0-362 exam dumps carefully before attempting your actual exam.
NEW QUESTION 38
Click the Exhibit button.
You configured R1 and R2 to form an OSPF adjacency, but the adjacency will not establish. Referring to the exhibit, which statement correctly identifies the problem?
- A. R2 has a wrong area configured
- B. R1 and R2 have the same router ID
- C. Hello and dead timers are not matching between R1 and R2
- D. R1 does not have a router ID defined
Answer: B
NEW QUESTION 39
You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the locally connected CE router's interface. The address of the interface is 192.168.1.1; the VPN routing-instance is named VPN-A.Which command will accomplish this task?
- A. ping routing-instance VPN-A 192.168.1.1
- B. ping instance VPN-A 192.168.1.1
- C. ping mpls l3vpn VPN-A 192.168.1.1
- D. ping VPN-A 192.168.1.1
- E. ping vpn-instance VPN-A 192.168.1.1
Answer: A
NEW QUESTION 40
Which two statements are true about IP and GRE tunnels? (Choose two.)
- A. Tunnel traffic is encrypted
- B. The TTL field is changed in the inner IP packet header
- C. Tunnel endpoints need a valid route to the remote endpoint
- D. The protocol field is changed in the inner IP packet header
Answer: B,C
NEW QUESTION 41
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The OSPF neighbor will be declared down if BFD hello packets are not received for 5 seconds
- B. The OSPF neighbor will be declared down if 500 BFD hello packets are missed
- C. The OSPF neighbor will be declared down if three BFD hello packets are missed
- D. The OSPF neighbor will be declared down if BFD hello packets are not received for 1.5 seconds
Answer: C,D
NEW QUESTION 42
Click the Exhibit.
You are planning the addition of a new EX3400 Series device to the network (EX-3400-7) to service MSTI-1 and MSTI-2.
Referring to the exhibit, which requirement must be met on EX-3400-7 for the MSTP instances to become fully operational and resilient?
- A. The MSTP revision-level must be incremented.
- B. The MSTP configuration-name must be the same.
- C. The CIST must be extended to EX-3400-7.
- D. The bridge-priority must match EX-3400-5 and EX-3400-6.
Answer: B
NEW QUESTION 43
Which two problems occur when increasing numbers of users are added to an Ethernet LAN with no switches present? (Choose two.)
- A. There is a greater chance for collisions to occur
- B. There is unnecessary consumption of network bandwidth
- C. Some devices will not see certain traffic
- D. The MAC table sizes increase
Answer: A,B
NEW QUESTION 44
To which multicast address is a VRRP advertisement packet sent?
- A. 224.0.0.13
- B. 224.0.0.6
- C. 224.0.0.18
- D. 224.0.0.22
Answer: C
Explanation:
Explanation/Reference: https://tools.ietf.org/html/rfc3768
NEW QUESTION 45
Which statement is true about an OSPF broadcast link?
- A. All routers form an adjacency with both the DR and BDR
- B. All routers form an adjacency with all other routers
- C. All routers form an adjacency only with the BDR
- D. All routers form an adjacency only with the DR
Answer: A
NEW QUESTION 46
You notice that the RID of your router is being taken from the address of your management interface.
What could cause this scenario?
- A. The loopback address was configured with a /32 address.
- B. A suitable loopback address was not configured on the router.
- C. The loopback address was not configured under [edit protocols ospf].
- D. The loopback address was configured under [edit routing-options].
Answer: B
NEW QUESTION 47
Which two statements are correct about default BGP route propagation? (Choose two.)
- A. EBGP speakers advertise IBGP-learned routes to other EBGP peers by using apolicy.
- B. IBGP speakers advertise EBGP-learned routes to other IBGP peers.
- C. IBGP speakers advertise IBGP-learned routes to other IBGP peers.
- D. EBGP speakers advertise IBGP-learned routes to other EBGP peers.
Answer: A,B
NEW QUESTION 48
Click the Exhibit button.
Which type of route is shown in the exhibit?
- A. aggregate
- B. generate
- C. static
- D. kernel
Answer: B
NEW QUESTION 49
Which statement is true when using MVRP on MX Series devices?
- A. MVRP works with MSTP and VSTP, but not RSTP
- B. MVRP works with MSTP and RSTP, but not VSTP
- C. MVRP works with RSTP and VSTP, but not MSTP
- D. MVRP does not work with MSTP, RSTP, and VSTP
Answer: B
NEW QUESTION 50
Click the Exhibit button.
Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)
- A. to mark the tunnel down after the hold-time expires
- B. to remove the tunnel interface from inet.0 after the hold-time expires
- C. to mark the tunnel up after the hold-time expires
- D. to reduce the risk of forwarding traffic through a stateless tunnel
Answer: A,D
NEW QUESTION 51
You want to make use of the nonstop active routing (NSR) feature.
Which complementary feature must also be enabled?
- A. IP anycast
- B. graceful Routing Engine switchover
- C. graceful restart
- D. Virtual Router Redundancy Protocol
Answer: B
NEW QUESTION 52
Click the Exhibit button.
Your co-worker configures the ge-0/0/0 interface with an IPv6 address of 2001:db8:0:9::/64. After committing the configuration, your co-worker executes the command shown in the exhibit.
What is the fe80::206:aff:fe0e:e01/64 address in this scenario?
- A. the multicast address
- B. the link-local address
- C. the loopback address
- D. the statically assigned address
Answer: B
NEW QUESTION 53
Which two statements describe advantages of using BGP for VPLS signaling instead of LDP signaling? (Choose two.)
- A. There is no need for MPLS signaling protocol.
- B. There is auto discovery.
- C. There is a well-defined scaling hierarchy.
- D. There is a separation of signaling from other services.
Answer: B,C
NEW QUESTION 54
You are asked to design a Layer 2 VPN service between service provider networks that needs Ethernet transport capabilities. The VPN should support two or three endpoints. Which Layer 2 VPN technology should you propose?
- A. LDP Layer 2 circuit, using the RFC 4448 Layer 2 frame format
- B. LDP-signaled VPLS
- C. BGP-signaled VPLS, using the RFC 4448 Layer 2 frame format
- D. BGP Layer 2 VPN
Answer: C
NEW QUESTION 55
......
Correct and Up-to-date Juniper JN0-362 BrainDumps: https://www.exam-killer.com/JN0-362-valid-questions.html
