C_IBP_2105 Practice Exam Tests Latest Updated on Nov-2021
Pass C_IBP_2105 Exam in First Attempt Guaranteed Dumps!
NEW QUESTION 37
Analytics charts are created by the user in the Advanced Analytics application. What actions are possible in the Advanced Analytics app? Note: There are 2 correct Answers to this question.
- A. Group data.
- B. Open graphics in Excel.
- C. Merge charts together.
- D. Apply filters on your data.
Answer: A,D
NEW QUESTION 38
Which of the following key functions are supported by SAP IBP for sales and operations? Note: There are
2 correct Answers to this question.
- A. A basic demand planning process
- B. Finite resource planning
- C. Manual creation of feasible constrained plans
- D. An advanced demand planning process
Answer: A,B
NEW QUESTION 39
You created a key figure and want to add calculations. Which of the following rules do you consider?
Note: There are 2 correct Answers to this question.
- A. Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.
- B. All key figure calculations have calculation inputs, which can be marked as stored or calculated.
- C. The calculation chain for a key figure must always result in a calculated key figure.
- D. Key figures can be calculated across different planning levels.
Answer: B,D
NEW QUESTION 40
You are reviewing the master data types for supply planning. Which master data types are compound master data types? Note: There are 2 correct Answers to this question.
- A. LOCATIONFR
- B. SOURCEPRODUCTION
- C. SOURCECUSTOMER
- D. SOURCELOCATION
Answer: C,D
NEW QUESTION 41
Which of the following checks for master data and key figures does the Check Mode algorithm trigger?
Note: There are 3 correct Answers to this question.
- A. It checks whether the sourcing in the Production Source Item Master Data type exists.
- B. It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network.
- C. It checks whether the location resource specified in the master data forms a cycle in the supply chain network.
- D. It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network.
- E. It checks whether the required planning level master data exists for a subset of input key figures.
Answer: B,D,E
NEW QUESTION 42
You are invited to review a problem with a customer's SAP IBP Excel template performance. What areas with the biggest potential performance impact would you focus on? Note: There are 2 correct Answers to this question.
- A. Complex calculation graphs for key figures
- B. Number of analytics charts displaying key figures' values
- C. Excessive IBP formatting in Excel UI
- D. Number of local members and complexity of calculations
Answer: A,C
NEW QUESTION 43
Which header name displays are available in the Report Options menu of the SAP IBP Excel interface?
Note: There are 2 correct Answers to this question.
- A. Changed member names that the user had created
- B. Business meaning, as defined in configuration
- C. Full unique name including the dimension and technical name
- D. Caption, as defined in configuration for the default name
Answer: B,C
NEW QUESTION 44
You are modeling the introduction of a new product using Lifecycle Planning functionality in SAP IBP.
What is mandatory to create in your planning area for the setup of reference product(s) to work? Note:
There are 2 correct Answers to this question.
- A. Definition of an attribute representing the product ID
- B. Definition of an attribute representing the product description
- C. Planning objects for the new product
- D. Definition of Actual Sales business meaning for one key figure
Answer: A,C
NEW QUESTION 45
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing. Which of the following parameters can you model to plan production with extra shift(s)?
- A. Incremental production values
- B. Production source validity at the start of seasonal peak
- C. Capacity expansion with additional costs
- D. Adjusted production interactive values
Answer: C
NEW QUESTION 46
What does ABC/XYZ segmentation allow you to do? Note: There are 2 correct Answers to this question.
- A. Analyze forecast accuracy by product class.
- B. Identify inventory items that require closer attention.
- C. Tailor your forecast strategy and inventory optimization to segment characteristics.
- D. Assign more appropriate inventory algorithms to planning objects.
Answer: A,C
NEW QUESTION 47
How can you make charts and dashboards private?
- A. Enable the relevant settings in the global configuration parameters.
- B. Enable the relevant settings in the Analytics Advanced and Dashboards Advanced applications.
- C. Choose only relevant key figures and filters in the Analytics Advanced application.
- D. Set restrictions for charts in the Permission filter application.
Answer: A
NEW QUESTION 48
You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check. Which settings can you change and still run a successful consistency check?
Note: There are 2 correct Answers to this question.
- A. Change the past and future horizon of the levels in the time profile.
- B. Add a new time profile level to the time profile.
- C. Change the description of the attributes in the time profile.
- D. Remove an attribute assigned to the time profile level if the attribute is used in a planning level.
Answer: A,C
NEW QUESTION 49
You are evaluating criteria for choosing the solver to support planning for a complex supply chain. What are some of the points that should be reviewed? Note: There are 2 correct Answers to this question.
- A. Prioritization of demand elements one by one is achieved by heuristics.
- B. Planning results can be generated faster by the optimizer.
- C. Push and Pull production models are used by the optimizer.
- D. Finite heuristics can achieve demand prioritization and pegging.
Answer: C,D
NEW QUESTION 50
Which of the following are features of the S&OP process templates? Note: There are 2 correct Answers to this question.
- A. New instances of templates allow for re-use of the same processes again.
- B. The number of steps in a process template is the same for all implementations.
- C. Each step depicted in the template can have tasks associated with it.
- D. All process templates are assigned to dashboards.
Answer: A,C
NEW QUESTION 51
Which of the following approaches could you take to reduce run times of an optimizer? Note: There are
2 correct Answers to this question.
- A. Increase the use of incremental lot size beyond the frozen horizon.
- B. Avoid using telescopic time buckets.
- C. Split into multiple planning areas to support weekly vs. daily planning needs.
- D. Use a subnetwork ID to reduce the size of the problem.
Answer: B,D
NEW QUESTION 52
Which of the following are the key features of SAP Supply Chain Control Tower? Note: There are 2 correct Answers to this question.
- A. Ability to create a feasible plan
- B. Ability to use task and case management
- C. Ability to create smart alerts
- D. Ability to balance demand and supply and attain financial targets
Answer: B,C
NEW QUESTION 53
Which of the following stages can be modeled using scenarios from the S&OP planning cycle? Note:
There are 2 correct Answers to this question.
- A. Demand review
- B. Demand sensing stage
- C. Demand-supply balancing
- D. Data input review for inventory
Answer: A,C
NEW QUESTION 54
What function would you use to configure a year-to-date calculation?
- A. Rolling Aggregation
- B. Dynamic Rolling Aggregation
- C. Cumulative Aggregation
- D. Last Period Aggregation
Answer: C
NEW QUESTION 55
Which of the following settings can you use in your supply planning background job triggered from Excel? Note: There are 2 correct Answers to this question.
- A. Type of algorithm to use
- B. UOM to ID
- C. Target currency
- D. Planning unit
Answer: A,B
NEW QUESTION 56
Why would you set up a cascading filter in the planning view? Note: There are 2 correct Answers to this question.
- A. To filter attributes based on specific values
- B. To filter attributes based on other attribute filters
- C. To filter using attributes that have a large number of values
- D. To filter data in an Application Job template
Answer: B,C
NEW QUESTION 57
Which of the following configuration options are part of the new key figure creation process? Note:
There are 3 correct Answers to this question.
- A. Hiding or displaying totals for the key figure
- B. Setting disaggregation logic for the key figure
- C. Enabling planning notes for the key figure
- D. Enabling fixing for the key figure
- E. Setting permitted planning levels
Answer: B,C,D
NEW QUESTION 58
Which of the following can be used as inputs for inventory level optimization? Note: There are 2 correct Answers to this question.
- A. Target inventory level
- B. Lead time variability
- C. Lot sizes
- D. Reorder point
Answer: B,C
NEW QUESTION 59
Which of these conditions must be met to create a Local Member key figure?
- A. Use Excel Cell References in Report Editor is selected.
- B. A key figure is created in the Planning Area app.
- C. A key figure is selected in the Key Figures tab in the Microsoft Excel add-in.
- D. Activate Local Member Recognition is selected.
Answer: D
NEW QUESTION 60
You need to create time periods for the time profile in a planning are
a. What should you be aware of when executing the Create Time Periods application job?
- A. The planning area with this time profile must be activated so that the application job can proceed.
- B. A time profile has to be activated so that the application job can proceed.
- C. This application job cannot be scheduled for immediate start.
- D. This application job can be run for multiple time profiles at once.
Answer: A
NEW QUESTION 61
Which library is used by the forecasting engine for the demand sensing algorithm?
- A. Heuristics library
- B. Predictive analytics library
- C. Demand library
- D. Supply chain algorithm library
Answer: D
NEW QUESTION 62
......
SAP C_IBP_2105 Exam Description:
The "SAP Certified Application Associate - SAP Integrated Business Planning" certification exam verifies that the candidate possesses the basic knowledge in the area of the SAP supply chain planning. This certificate proves that the candidate has a basic overall understanding within this consultant profile of the industry solutions, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP Integrated Business Planning. Please note that this 2105 version of the exam takes part in the Stay Current with SAP Global Certification program. Once you pass this version of the exam, make sure that you start your stay current process. You will be required to take the quarterly stay current assessment for all subsequent SAP IBP releases via the SAP Learning Hub starting with the 2108 release to maintain your SAP IBP consultant certification status and badge. In order to participate in the stay current program and access the stay current enablement and assessment, you will need at minimum an SAP Learning Hub, edition for IoT and Digital Supply Chain subscription. (https://training.sap.com/learninghub)
SAP Certified Application Associate Free Certification Exam Material from Exam-Killer with 82 Questions: https://www.exam-killer.com/C_IBP_2105-valid-questions.html
