[2024] Use Valid New 5V0-22.23 Questions - Top choice Help You Gain Success
5V0-22.23 Exam Practice Materials Collection
VMware 5V0-22.23 exam is intended for IT professionals who are responsible for designing, implementing, and administering vSAN environments. VMware vSAN Specialist (v2) certification is suitable for system administrators, virtualization engineers, and IT consultants who have experience in VMware vSphere and vSAN technologies. Earning the VMware vSAN Specialist (v2) certification demonstrates the candidate's proficiency in vSAN technology, making them a valuable asset to organizations that use VMware solutions.
To pass the VMware 5V0-22.23 certification exam, candidates must have a solid understanding of VMware vSphere and vSAN technologies, as well as experience working with VMware technologies in a production environment. Candidates should also have experience with storage technologies, including storage area networks (SANs), network-attached storage (NAS), and direct-attached storage (DAS).
VMware 5V0-22.23 is a certification exam designed for individuals who want to prove their expertise in VMware vSAN implementation and administration. 5V0-22.23 exam tests the candidate's knowledge and skills in vSAN architecture and components, vSAN design, deployment, and management. 5V0-22.23 exam also covers topics such as vSAN networking, data services, and data protection. Passing this certification exam demonstrates that the candidate has a solid understanding of vSAN technology and can effectively implement and manage vSAN solutions in a VMware environment.
NEW QUESTION # 16
A vSAN administrator has a group of requirements from the application team, which mandates spreading the components across storage devices as much as possible.
What should the vSAN Administrator consider to achieve such a requirement for building a new vSAN cluster? (Choose two.)
- A. Configure disk striping in OSA
- B. Enable deduplication for vSAN
- C. Enable Force Provisioning in OSA
- D. Configure disk striping in ESA
- E. Create a dedicated Storage Pool in ESA
Answer: A,B
Explanation:
Explanation
To spread the components across storage devices as much as possible, the vSAN administrator can configure disk striping in either OSA or ESA. Disk striping is a policy attribute that defines the number of capacity devices across which each replica of a storage object is striped. A higher number of stripes can result in better performance and availability, but also consumes more storage space. Disk striping can be configured in OSA by using the Number of disk stripes per object policy attribute, or in ESA by using the Striping Width policy attribute12 References: 1: VMware vSAN Specialist v2 Exam Preparation Guide, page 14 2: VMware vSAN Design and Sizing Guide, page 32
NEW QUESTION # 17
When adding a disk to a host that was previously used in a decommissioned vSAN cluster the intended disk does not show among the available devices in disk management.
Which action should be taken prior to assigning the disk on disk management?
- A. Create a 1GB metadata partition
- B. Delete all device partitions
- C. Create a VMFS partition
- D. Format the existing partition
Answer: B
Explanation:
Explanation
When adding a disk to a host that was previously used in a decommissioned vSAN cluster, the disk may still have some vSAN metadata partitions that prevent it from being recognized by disk management. To resolve this issue, the disk partitions need to be deleted using either ESXCLI or partedUtil commands. This will erase all data on the disk and make it available for use in disk management. References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 21
NEW QUESTION # 18
What are two prerequisites for using the TRIM and UNMAP capability of vSAN? (Choose two.)
- A. TRIM and UNMAP is enabled.
- B. Deduplication and compression are enabled.
- C. Change the Object Space Reservation to 100.
- D. The vSAN cluster is an all-flash architecture.
- E. The VM quest operating system supports ATA TRIM or SCSI UNMAP capability
Answer: A,D
Explanation:
Explanation
The two prerequisites for using the TRIM and UNMAP capability of vSAN are:
B: The vSAN cluster is an all-flash architecture. TRIM and UNMAP are only supported on all-flash vSAN clusters, as they can reclaim space from flash devices that use thin provisioning. TRIM and UNMAP are not supported on hybrid vSAN clusters, as they cannot reclaim space from magnetic disks that use thick provisioning1.
D: TRIM and UNMAP is enabled. TRIM and UNMAP are disabled by default in vSAN, as they might have a performance impact on some workloads. To enable TRIM and UNMAP on a vSAN cluster, the administrator must use the following RVC command: vsan.unmap_support -enable2. After enabling TRIM and UNMAP, the administrator must power off and then power on all VMs that use the vSAN datastore.
NEW QUESTION # 19
What are two characteristics of the vSAN Data-At-Rest Encryption (DARE)? (Choose two.)
- A. it is not supported on Stretched Cluster environments.
- B. it requires Self-Encrypting Drives in order to work.
- C. it continues to operate unaffected during downtime on vCenter Server.
- D. it is Software Defined and works independently of the Cache or Capacity drives installed on the Nodes.
- E. it needs to be enabled together with the vSAN Data-In-Transit encryption.
Answer: C,D
Explanation:
Explanation
Two characteristics of the vSAN Data-At-Rest Encryption (DARE) are that it is Software Defined and works independently of the Cache or Capacity drives installed on the Nodes, and that it continues to operate unaffected during downtime on vCenter Server. DARE is a feature that encrypts all data stored on vSAN disks using AES-256 XTS mode. It does not require Self-Encrypting Drives (SEDs) to work, as it uses software-based encryption keys that are generated by an external Key Management Server (KMS) or a vSphere Native Key Provider. DARE also does not depend on the type or size of the disks used in the vSAN cluster, as it encrypts data after all other processing, such as deduplication and compression, is performed.
DARE can function even when the vCenter Server is offline or unavailable, as it uses key persistence to store the encryption keys on the ESXi hosts or in a Trusted Platform Module (TPM). The hosts can access the keys without contacting the KMS or the vCenter Server. The other options are notcorrect, as they do not describe DARE accurately. DARE does not need to be enabled together with the vSAN Data-In-Transit encryption, as they are independent features that can be enabled or disabled separately. Data-In-Transit encryption encrypts data that is transmitted between hosts in a vSAN cluster using secure sockets layer (SSL) certificates. DARE is supported on Stretched Cluster environments, as it can encrypt data across multiple sites using site affinity rules.
NEW QUESTION # 20
After a planned power outage, an administrator decided to restart the vSAN cluster manually.
What is the correct sequence of steps for the administrator to follow after powering on the ESXi hosts?
- A. 1. Exit all hosts from maintenance mode.
2. Enable cluster member updates from vCenter Server only on one ESXi host.
3. Run the python reboot helper script only on one ESXi host to recover the cluster. - B. 1. Exit all hosts from maintenance mode.
2. Run the python reboot helper script only on one ESXi host to recover the cluster.
3. Enable cluster member updates from vCenter Server on all ESXi hosts. - C. 1. Enable cluster member updates from vCenter Server only on one ESXi host.
2. Run the python reboot helper script only on one ESXi host to recover the cluster.
3. Exit all hosts from maintenance mode. - D. 1. Enable cluster member updates from vCenter Server on all ESXi hosts.
2. Run the python reboot helper script on all ESXi hosts to recover the cluster.
3. Exit all hosts from maintenance mode.
Answer: C
Explanation:
Explanation
This is the sequence of steps recommended by VMware for manually restarting the vSAN cluster after a planned power outage. The steps are as follows:
Enable cluster member updates from vCenter Server only on one ESXi host. This will allow the host to receive the latest cluster membership information from vCenter Server and avoid any conflicts or inconsistencies with other hosts. The command to enable cluster member updates is esxcfg-advcfg -s 1
/VSAN/IgnoreClusterMemberListUpdates.
Run the python reboot helper script only on one ESXi host to recover the cluster. This will prepare the cluster for a manual restart by partitioning the cluster and ensuring that all hosts have consistent metadata. The command to run the python reboot helper script is python
/usr/lib/vmware/vsan/bin/reboot_helper.py prepare.
Exit all hosts from maintenance mode. This will allow the hosts to resume normal operations and join the vSAN cluster. The command to exit maintenance mode is esxcli system maintenanceMode set -e false.
The other options are incorrect for the following reasons:
B, exit all hosts from maintenance mode, run the python reboot helper script only on one ESXi host to recover the cluster, and enable cluster member updates from vCenter Server on all ESXi hosts, is incorrect because exiting all hosts from maintenance mode before running the python reboot helper script can cause data inconsistency or corruption, as the hosts may not have the latest metadata or cluster membership information. Enabling cluster member updates from vCenter Server on all ESXi hosts is also unnecessary and can cause conflicts or inconsistencies with other hosts.
C, exit all hosts from maintenance mode, enable cluster member updates from vCenter Server only on one ESXi host, and run the python reboot helper script only on one ESXi host to recover the cluster, is incorrect because exiting all hosts from maintenance mode before running the python reboot helper script can cause data inconsistency or corruption, as the hosts may not have the latest metadata or cluster membership information.
D, enable cluster member updates from vCenter Server on all ESXi hosts, run the python reboot helper script on all ESXi hosts to recover the cluster, and exit all hosts from maintenance mode, is incorrect because enabling cluster member updates from vCenter Server on all ESXi hosts is unnecessary and can causeconflicts or inconsistencies with other hosts. Running the python reboot helper script on all ESXi hosts concurrently can also cause a race condition that can result in unexpected outcomes.
References:
Manually Shut Down and Restart the vSAN Cluster
Restart the vSAN Cluster
NEW QUESTION # 21
What is the purpose of the TRIM/UNMAP process?
- A. Collects vSAN log files
- B. Repairs internal cache errors
- C. Deletes orphaned snapshots
- D. Reclaims disk space
Answer: D
Explanation:
Explanation
The purpose of the TRIM/UNMAP process is to reclaim disk space that is no longer used by the guest operating system or the virtual machine. TRIM and UNMAP are commands that allow the guest operating system to inform the underlying storage layer that certain blocks are no longer in use and can be freed up. This process helps to improve storage efficiency and utilization,especially for thin-provisioned disks that grow dynamically as data is written to them. The other options are not correct. The TRIM/UNMAP process does not collect vSAN log files, repair internal cache errors, or delete orphaned snapshots. These are different tasks that are performed by other tools or processes. References: Enabling TRIM/UNMAP Commands for VMware Cloud on AWS Clusters; Reclaiming guest OS storage in VMware vSAN 6.7 U1 with TRIM/UNMAP process
NEW QUESTION # 22
An administrator is troubleshooting a vSAN performance issue. In the vSAN performance monitor there is a high latency on the vSAN cluster.
What is a possible cause of this?
- A. There is congestion in one or more disk groups.
- B. The Virtual Machines are using PVSCSI controllers.
- C. Jumbo frames are not enabled on the VMkernel adapters.
- D. Erasure Coding is disabled in the storage policy.
Answer: A
Explanation:
Explanation
A possible cause of high latency on the vSAN cluster is that there is congestion in one or more disk groups.
Congestion is a measure of how busy the storage devices are in handling I/O requests. When congestion is high, it means that the storage devices are overloaded and cannot process the requests fast enough, resulting in increased latency and reduced throughput. Congestion can be caused by various factors, such as insufficient cache capacity, disk failures, network issues, or heavy workload. The other options are not likely to cause high latency on the vSAN cluster. The Virtual Machines can use PVSCSI controllers without affecting latency, as they are optimized for high performance. Erasure Coding is a space efficiency feature that does not impact latency significantly. Jumbo frames are not required for vSAN, and enabling them does not guarantee lower latency. References: vSAN Performance Monitor; [vSAN Congestion Explained]
NEW QUESTION # 23
A vSAN administrator has recently upgraded a vSAN cluster to 8.0 OSA and has enabled Capacity Reserve features to reduce the amount of capacity reserved for transient and rebuild operations.
Which scenario would prevent this feature from operating properly?
- A. The physical disk has reached an 80% full reactive rebalance threshold.
- B. The used space on vSAN datastore exceeds the suggested slack rebuild threshold.
- C. Underutilized space is above 25-30% of the total capacity threshold.
- D. The used space on vSAN datastore exceeds the suggested host rebuild threshold.
Answer: B
Explanation:
Explanation
The Capacity Reserve feature in vSAN 8.0 OSA reduces the amount of capacity reserved for transient and rebuild operations by using a slack space threshold. This threshold is calculated based on the size of the largest component in the cluster and the number of failures to tolerate. If the used space on vSAN datastore exceeds the suggested slack space threshold, the feature will not operate properly and vSAN will revert to using the host rebuild reserve threshold. The other scenarios will not affect the Capacity Reserve feature. References:
[VMware vSAN Specialist v2 EXAM 5V0-22.23], page 28
NEW QUESTION # 24
An administrator has to perform maintenance on one of the hosts in a three-node vSAN Cluster.
Which maintenance mode option will give the administrator the best availability for the VMs with the least effort and data transfer?
- A. Migrate all VMs and their storage from the host to a different storage system
- B. Full data migration
- C. Migrate all VMs and their storage from the host to a different vSphere cluster
- D. Ensure accessibility
Answer: D
Explanation:
Explanation
To perform maintenance on one of the hosts in a three-node vSAN cluster with the best availability for the VMs with the least effort and data transfer, the maintenance mode option that should be used is Ensure accessibility. This option migrates only enough components to ensure that all accessible VMs remain accessible, but does not guarantee full data redundancy or policy compliance. This option is also the only evacuation mode available for a three-node cluster or a cluster with three fault domains, as there are not enough hosts to perform full data migration or re-protection after a failure. The other options are not correct.
Migrating all VMs and their storage from the host to a different storage system or a different vSphere cluster would require more effort and data transfer than using Ensure accessibility, as well as additional resources and configuration steps. Full data migration is not possible in a three-nodecluster, as it would require at least four hosts to evacuate all data from one host and maintain full redundancy and policy compliance.
References: Place a Member of vSAN Cluster in Maintenance Mode; Working with Maintenance Mode
NEW QUESTION # 25
An organization wants to implement a virtual desktop infrastructure (VDI) solution on their vSAN storage.
They also need to store their applications running inside the VDI environment on vSAN storage.
Which two end-user computing (EUC) solutions could be implemented to satisfy the requirements of the organization? (Choose two.)
- A. Workspace ONE Access
- B. Dynamic Environment Manager
- C. Workspace ONE UEM
- D. Horizon
- E. Agp_ Volumes
Answer: B,D
Explanation:
Explanation
Horizon and Dynamic Environment Manager are two end-user computing (EUC) solutions that can be implemented on vSAN storage to provide a virtual desktop infrastructure (VDI) solution and store applications running inside the VDI environment. Horizon is a platform that delivers virtual desktops and applications across a variety of devices and locations, while Dynamic Environment Manager is a tool that provides personalization and dynamic policy configuration across any virtual, physical, and cloud-based Windows desktop environment. The other solutions are not directly related to VDI or application storage on vSAN.
References: VMware vSAN Specialist v2 EXAM 5V0-22.23, page 8, Objective 3.5; [Horizon]; [Dynamic Environment Manager]
NEW QUESTION # 26
After reviewing various performance charts at a cluster level, an administrator found an individual VM impacting overall performance of the vSAN cluster.
What feature should be used to introspect multiple performance metrics of a single virtual machine?
- A. llOlnsiqht
- B. I/O Trip Analyzer
- C. esxci
- D. Skyline Health
Answer: B
Explanation:
Explanation
To introspect multiple performance metrics of a single virtual machine, such as latency, throughput, IOPS, and congestion, the feature that should be used is I/O Trip Analyzer. This feature allows the administrator to diagnose the virtual machine I/O latency issues by providing a breakdown of the latencies at each layer of the vSAN stack, such as VM, host, network, and disk group. The other options are not correct, as they do not provide multiple performance metrics of a single virtual machine. esxcli is a command-line tool that can be used to manage various aspects of ESXi hosts, but it does not provide detailed performance analysis of virtual machines. Skyline Health is a feature that provides proactive notifications and recommendations for software and hardware issues based on VMware Analytics Cloud, but it does not provide granular performance metrics of virtual machines. llOlnsiqht is not a valid feature name in vSAN. References: Use I/O Trip Analyzer; Monitoring vSAN Performance
NEW QUESTION # 27
What is the purpose of host rebuild reserve in vSAN?
- A. Reserves space in case of single host failure
- B. Reserves space for internal operations
- C. Allocates capacity for vCLS
- D. Stores vSphere HA heartbeats
Answer: A
Explanation:
Explanation
The host rebuild reserve is a feature that allows vSAN to reserve space in the cluster for vSAN to be able to repair in case of a single host failure. This reservation is set to one host worth of capacity, which means that if one host in the vSAN cluster fails and no longer contributes storage, there is still sufficient capacity remaining in the cluster to rebuild and re-protect all vSAN objects. This feature prevents the creation of new VMs or powering on VMs if such operations consume the reserved space. By default, the host rebuild reserve is disabled, but it can be enabled in the vSAN Services configuration. The other options are not related to the hostrebuild reserve. References: vSAN Capacity Management in v7.0U1; Configure Reserved Capacity
NEW QUESTION # 28
An administrator has 24 physical servers that need to be configured with vSAN. The administrator needs to ensure that a single rack failure is not going to affect the data availability. The number of racks used should be minimized.
What has to be done and configured to achieve this goal?
- A. Distribute servers across at least three different racks and configure three fault domains
- B. Distribute servers across at least two different racks and configure two fault domains
- C. Configure disk groups with a minimum of four capacity disks in each server and distribute them across four racks
- D. Enable deduplication and compression
Answer: A
Explanation:
Explanation
To ensure that a single rack failure is not going to affect the data availability, while minimizing the number of racks used, the administrator has to do the following:
Distribute servers across at least three different racks. This is because vSAN supports up to three fault domains per cluster, which can be used to tolerate one or two failures. If only two racks are used, then only one failure can be tolerated4 Configure three fault domains. A fault domain is a logical grouping of hosts that share a common failure point, such as a rack or a power supply. By configuring fault domains, vSAN can place replicas of an object across different fault domains, so that a failure within one fault domain does not result in data loss orunavailability4 References: 4: VMware vSAN Specialist v2 Exam Preparation Guide, page 13
NEW QUESTION # 29
A vSAN administrator is investigating vSAN performance related problems but cannot find any vSAN performance statistics on the cluster summary page.
Why is this situation occurring?
- A. vSAN performance statistics are only available via CLI.
- B. The administrator has read-only permissions on the cluster level.
- C. The vRealize Operations Manager is not integrated with vSAN cluster.
- D. vSAN performance service is not enabled.
Answer: D
Explanation:
Explanation
The reason why the vSAN administrator cannot find any vSAN performance statistics on the cluster summary page is that the vSAN performance service is not enabled. The vSAN performance service is a feature that collects and analyzes performance metrics and displays them in graphical charts in vCenter. The vSAN performance service must be turned on manually for each vSAN cluster, as it is not enabled by default. The other options are not correct. The integration of vRealize Operations Manager with the vSAN cluster is not required to view vSAN performance statistics, as they are available in vCenter. The administrator's permissions on the cluster level do not affect the visibility of vSAN performance statistics, as they are accessible to any user who can view the cluster. vSAN performance statistics are not only available via CLI, as they can also be viewed in vCenter using the vSAN performance service. References: About the vSAN Performance Service; Enable or Disable the Performance Service
NEW QUESTION # 30
During yesterday's business hours, a cache drive failed on one of the vSAN OSA nodes. The administrator reached out to the manufacturer and received a replacement drive the following day. When the drive failed, vSAN started a resync to ensure the health of the data, and all objects are showing a healthy and compliant state. The vSAN administrator needs to replace the failed cache drive.
Which set of steps should the vSAN administrator take?
- A. Place the disk group into maintenance mode, and select Full Data Migration. Then, physically replace the failed cache device. Afterwards. vSAN will rebuild the disk group automatically.
C Remove the existing vSAN disk group and physically replace thedevice. Thencheck to verify that the ESXi host automatically detects the new device Afterwardsmanually recreate the Disk Group - B. Physically replace the failed cache device, and vSAN will automatically allocate the storage. Then, rebalance the cache layer.
- C. Physically replace the failed cache device, and vSAN will automatically create a new disk group. Then, remove the disk group with the failed device.
Answer: B
Explanation:
Explanation
To replace a failed cache drive in a vSAN OSA cluster, the vSAN administrator should remove the existing vSAN disk group and physically replace the device. Then check to verify that the ESXi host automatically detects the new device Afterwards manually recreate the Disk Group. This is because when a cache drive fails, it affects the entire disk group that contains it, and vSAN does not allow removing only the cache drive from a disk group. Therefore, the administrator must remove the whole disk group before replacing the cache drive, and then recreate it with the new cache drive and the existing capacity drives. The other options are not correct. Physically replacing the failed cache drive without removing the disk group first might cause errors or inconsistencies in vSAN configuration. vSAN will not automatically create a new disk group or allocate storage after replacing a cache drive, as these actions require manual intervention from the administrator.
Rebalancing the cache layer is not necessary after replacing a cache drive, as vSAN will automatically distribute data across all devices in the disk group. References: Replace a Flash Caching Device on a Host; How to manually remove and recreate a vSAN disk group using esxcli
NEW QUESTION # 31
A vSAN administrator encounters a non-compliant virtual machine and the compliance status of some of its objects is noncompliant. vSAN is able to locate a full replica of 55% of the votes for the noncompliant objects.
What will vSAN do with the virtual machine?
- A. Mark the virtual machine as inaccessible as vSAN is not able to locate more than 60% of the votes for the objects
- B. Mark the virtual machine as orphaned
- C. Power off the virtual machine
- D. Mark the virtual machine as compliant and automatically recover the noncompliant objects
Answer: D
Explanation:
Explanation
If vSAN is able to locate a full replica of 55% of the votes for the noncompliant objects of a virtual machine, vSAN will mark the virtual machine as compliant and automatically recover the noncompliant objects. This is because vSAN uses a quorum-based algorithm to determine object availability and compliance. An object is considered available if more than 50% of its votes are accessible, and compliant if it meets its assigned storage policy requirements. In this case, since 55% of the votes are accessible, vSAN can access a full replica of each object and restore its compliance state by rebuilding any missing or corrupted components. The other options are not correct. vSAN will not power off, mark as inaccessible, or mark as orphaned a virtual machine that has more than 50% of its votes accessible, as these actions would result in unnecessary downtime or data loss.
References: Object States That Indicate Problems in vSAN; Accessibility of Virtual Machines Upon a Failure in vSAN
NEW QUESTION # 32
What is the minimum required number of hosts to provide data redundancy for a vSAN stretched cluster using dual-site mirroring and local protection with 1 failure - RAID-1 (Mirroring)?
- A. 3 hosts
- B. 4 hosts
- C. 6 hosts
- D. 3 hosts
Answer: C
Explanation:
Explanation
The minimum required number of hosts to provide data redundancy for a vSAN stretched cluster using dual-site mirroring and local protection with 1 failure - RAID-1 (Mirroring) is six hosts. This is because a vSAN stretched cluster requires at least three hosts per site, and each site must have enough hosts to tolerate one host failure. Therefore, the minimum configuration is three hosts per site, plus one witness host at a third site, for a total of six hosts. References: [VMware vSAN Specialist v2 EXAM 5V0-22.23], page 14
NEW QUESTION # 33
Due to a planned power outage, an administrator decides to shut down the vSAN cluster using the Shutdown Cluster Wizard. The administrator starts by checking the vSAN health service to confirm the cluster is healthy and then powers off all virtual machines (VMs) including vCLS VMs.
Which step needs to be taken before starting the Shutdown Cluster Wizard?
- A. Shutdown vCenter
- B. Disable cluster member updates from vCenter Server
- C. Place all ESXi hosts into maintenance mode
- D. Turn off High Availability
Answer: D
Explanation:
Explanation
To shut down the vSAN cluster using the Shutdown Cluster Wizard, the administrator needs to turn off High Availability (HA) before starting the wizard. This is because HA monitors the cluster for host failures and attempts to restart the affected VMs on other hosts. If HA is not turned off, the cluster might register host shutdowns as failures and trigger unnecessary VM restarts, which can interfere with the graceful shutdown process. Therefore, the administrator should disable HA from the Configure tab of the cluster before using the Shutdown Cluster Wizard12 References: 1: Shut Down the vSAN Cluster Using the Shutdown Cluster Wizard 3 2: Manually Shut Down and Restart the vSAN Cluster 4
NEW QUESTION # 34
A three-node vSAN OSA cluster with business critical intensive I/O workload is running out of capacity. Each host consists of five disk groups with four capacity disks. The administrator needs to expand the capacity of the vSAN datastore as soon as possible.
What should the administrator do?
- A. Add additional capacity by addinga vSAN ReadyNode to the cluster
- B. Enable Deduplication and Compression on the cluster level
- C. Add additional capacity disks to each disk group
- D. Add additional capacity by adding a disk on one host and creating a storage pool
Answer: C
Explanation:
Explanation
The correct answer is D, add additional capacity disks to each disk group. This is because adding capacity disks to existing disk groups is the fastest and easiest way to expand the capacity of the vSAN datastore without disrupting any ongoing operations or requiring additional hardware. The administrator can add up to five capacity disks per disk group in vSAN OSA, which means each host can have up to 25 capacity disks in total. The administrator should make sure that the new capacity disks are unformatted and not partitioned, so that vSAN can recognize and claim them. The administrator should also manually rebalance the cluster after adding the capacity disks to distribute the data evenly across the new devices. The other options are incorrect for the following reasons:
A, enable Deduplication and Compression on the cluster level, is incorrect because enabling Deduplication and Compression is not a recommended way to expand the capacity of the vSAN datastore. Deduplication and Compression is a space efficiency feature that reduces the logical space consumption of data by eliminating duplicate blocks and applying compression algorithms. However, enabling Deduplication and Compression requires a full data evacuation and resynchronization, which can be disruptive and time-consuming. Deduplication and Compression also introduces additional CPU and memory overhead, which can affect the performance of the cluster. Deduplication and Compression is only supported on all-flash clusters, not on hybrid clusters.
B, add additional capacity by adding a disk on one host and creating a storage pool, is incorrect because creating a storage pool is not supported in vSAN OSA. A storage pool is a new configuration introduced in vSAN 8 ESA, where all disks are treated as capacity disks and use a new algorithm to distribute data acrossthem. This configuration is not compatible with vSAN OSA, which uses a disk group configuration where one disk is designated as a cache disk and the rest are capacity disks. To use a storage pool, the administrator would need to migrate to vSAN 8 ESA on a new cluster with new hardware.
C, add additional capacity by adding a vSAN ReadyNode to the cluster, is incorrect because adding a vSAN ReadyNode to the cluster is not the fastest or easiest way to expand the capacity of the vSAN datastore. A vSAN ReadyNode is a preconfigured server that meets the hardware requirements for running vSAN. Adding a vSAN ReadyNode to the cluster would require additional hardware procurement, installation, and configuration. It would also increase the compute capacity of the cluster, which may not be necessary for the workload. Adding a vSAN ReadyNode would also trigger a resynchronization of data across the cluster, which can affect the performance and availability of the cluster. References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 10
NEW QUESTION # 35
vSAN requires that the virtual machines deployed on the vSAN datastores are assigned at least one storage policy, but the administrator did not explicitly assign a storage policy when provisioning the new VM.
What is the result of this situation?
- A. The VM provisioning will fail.
- B. The VM objects will be protected based on the vSAN Default Storage Policy configurations.
- C. No data protection will be applied to the VM objects.
- D. The vSphere Web Client will choose the last vSAN Storage Policy used.
Answer: B
Explanation:
Explanation
If the administrator did not explicitly assign a storage policy when provisioning a new VM on a vSAN datastore, the result is that the VM objects will be protected based on the vSAN Default Storage Policy configurations. The vSAN Default Storage Policy is assigned to all VM objects if no other vSAN policy is assigned when provisioning a VM. The default policy contains vSAN rule sets and a set of basic storage capabilities, such as Failures to tolerate set to 1, Number of disk stripes per object set to 1, and Thin provisioning. The other options are not correct. The VM provisioning will not fail, as vSAN requires that every VM has at least one storage policy. The vSphere Web Client will not choose the last vSAN Storage Policy used, as it will always apply the default policy if no other policy is selected. No data protection will not be applied to the VM objects, as they will have at least one replica based on the default policy.
References: About the vSAN Default Storage Policy; Using vSAN Policies
NEW QUESTION # 36
A vSAN administrator receives a request from the application team to create a virtual machine on a vSAN datastore. The requirements state that the virtual machine needs to be available quickly after a failure occurs.
The solution must minimize administrative effort.
Which vSphere feature should the vSAN administrator implement?
- A. Distributed Services Engine
- B. Fault Tolerance
- C. vSphere High Availability
- D. vSphere Distributed Resource Scheduler
Answer: C
Explanation:
Explanation
vSphere High Availability is the correct answer because it meets the requirements of making the virtual machine available quickly after a failure occurs and minimizing administrative effort. vSphere HA monitors the health and availability of the hosts and virtual machines in a cluster and automatically restarts any failed virtual machines on other hosts within minutes. vSphere HA also supports proactive HA, which can migrate virtual machines from hosts that are about to fail or have degraded performance. vSphere HA is easy to configure and manage, as it only requires enabling HA on the cluster level and setting some basic policies and options. Distributed Services Engine,Fault Tolerance, and vSphere Distributed Resource Scheduler are not valid or optimal solutions for this scenario. Distributed Services Engine is a new feature in vSphere 7 that provides network services such as firewalling, load balancing, routing, and NAT for virtual machines and containers. It does not directly affect the availability or recovery of virtual machines after a failure. Fault Tolerance provides continuous availability for virtual machines by creating a secondary copy of the virtual machine that runs in lockstep with the primary copy on another host. If the primary copy fails, the secondary copy takes over without any interruption or data loss. However, Fault Tolerance has some limitations and overheads, such as requiring dedicated network bandwidth, supporting only one vCPU per virtual machine, and consuming twice as much CPU and memory resources as a single virtual machine. Fault Tolerance also requires more administrative effort than vSphere HA, as it needs to be enabled and configured for each individual virtual machine. vSphere Distributed Resource Scheduler is a feature that balances the workload and resources across a cluster by automatically migrating virtual machines based on their demand and priority.
It does not directly affect the availability or recovery of virtual machines after a failure, although it can work together with vSphere HA to find optimal hosts for restarting failed virtual machines. References:
[VMware vSAN Specialist v2 Exam Preparation Guide], page 11
vSphere Availability
Distributed Services Engine
vSphere Distributed Resource Scheduler
NEW QUESTION # 37
Which VMware solution requires vSAN usage?
- A. VMware Cloud Foundation
- B. VMware Aria Automation
- C. VMware Telco Cloud Automation
- D. VMware Horizon
Answer: A
Explanation:
Explanation
The VMware solution that requires vSAN usage is VMware Cloud Foundation. VMware Cloud Foundation is an integrated software stack that bundles compute virtualization (VMware vSphere), storage virtualization (VMware vSAN), network virtualization (VMware NSX), and cloud management and monitoring (VMware vRealize Suite) into a single platform that can be deployed on premises or as a service within a public cloud.
VMware Cloud Foundation relies on vSAN as the primary storage solution for its workload domains, which are logical pools of resources that can be used to run different types of workloads. The other options are not correct. VMware Horizon, VMware Telco Cloud Automation, and VMware Aria Automation are VMware solutions that do not require vSAN usage, although they can benefit from it. VMware Horizon is a platform that delivers virtual desktops and applications across a variety of devices and locations, and it can use any supported storage solution, including vSAN. VMware Telco Cloud Automation is a cloud-native orchestration and automation platform that enables communication service providers to accelerate the deployment and lifecycle management of network functions and services across any network and cloud. It can use any supported storage solution, including vSAN. VMware Aria Automation is not a valid VMware solution name.
References: VMware Cloud Foundation Overview; VMware Horizon Overview; VMware Telco Cloud Automation Overview
NEW QUESTION # 38
......
Maximum Grades By Making ready With 5V0-22.23 Dumps: https://www.exam-killer.com/5V0-22.23-valid-questions.html
Get Latest and 100% Accurate 5V0-22.23 Exam Questions: https://drive.google.com/open?id=1xKETf4DVkxPIksixrAjHNuREXFSiOppy
