100% Real 101 dumps - Brilliant 101 Exam Questions PDF
101 Exam PDF [2023] Tests Free Updated Today with Correct 240 Questions
101 Exam Target Audience
The F5 101 test is at the beginner level and extends an opportunity for building skills to individuals who are just discovering about the F5, its technologies, and products.
NEW QUESTION 36
Which of the following is NOT a profile type on the BIG-IP?
- A. Protocol
- B. Persistence
- C. SSL
- D. Application
- E. Authentication
Answer: D
NEW QUESTION 37
Information leakage is a major obstacle to achieving PCI DSS compliance.
- A. True
- B. False
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION 38
Which two statements describe differences between the active and standby systems. (Choose two.)
- A. Monitors are performed only by the active system.
- B. Floating self-IP addresses are hosted only by the active system.
- C. Configuration changes can only be made on the active system.
- D. Failover triggers only cause changes on the active system.
- E. Virtual server addresses are hosted only by the active system.
Answer: B,E
NEW QUESTION 39
Which of the following is a valid IP address and prefix length?
- A. 192 168 :0 255/25
- B. 192. 168.:0 177/25
- C. 192 168:0. 129/25
- D. 192.168:0 128/25
Answer: C
NEW QUESTION 40
In the following configuration, a virtual server has the following HTTP class configuration:
A request arriving for WWW.F5.COM will be matched by which class(es)?
- A. Class 1
- B. The request will be dropped
- C. Both Class 1 and Class 2
- D. Class 2
Answer: D
NEW QUESTION 41
GTM can load balance to LTM in addition to non-BIG-IP hosts.
- A. True
- B. False
Answer: A
NEW QUESTION 42
FastCache will NOT work with compressed objects.
- A. True
- B. False
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 43
Requests that do not meet the ASM security policies can:
- A. Be blocked
- B. Generate learningsuggestions
- C. Be logged
- D. All of the above
Answer: D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION 44
Which of the following protocol protections is not provided by the Protocol Security Manager?
- A. HTTP
- B. SMTP
- C. SSH
- D. FTP
Answer: C
NEW QUESTION 45
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If the origin server were to initiate traffic via the BIG-IP, what changes, if any, would take place when the BIG-IP processes such packets?
- A. The source address would not change, but the destination address would be changed to a self-IP of the BIG-IP.
- B. The source address would not change, but the destination address would be changed to the NAT address.
- C. The source address would be changed to the NAT address and destination address would be left unchanged.
- D. The BIG-IP would drop the request since the traffic didn't arrive destined to the NAT address.
Answer: C
NEW QUESTION 46
Similar to LTM monitors, GTM monitors use both an Interval and a Timeout value.
- A. True
- B. False
Answer: A
NEW QUESTION 47
What happens when the data center that GTM recommends for a client is unavailable?
- A. GTM uses cached information to determine an alternate route.
- B. GTM directs the client to use its DNS cache to select an alternate location.
- C. The client continues to attempt to access the preferred data center.
- D. GTM queries the local DNS server.
- E. GTM sends subsequent queries to the next preferred data center.
Answer: E
Explanation:
Explanation/Reference:
NEW QUESTION 48
Which three of the following must be done in order for GTM to properly communicate LTM?
- A. Connect the GTM and LTM with a network crossover cable
- B. Add the LTM object to the GTM configuration
- C. Synchronize the big3d versions between GTM and LTM
- D. Configure the GTM and LTM to use MAC masquerading
- E. Ensure that GTM and LTM use the same floating IP address
- F. Exchange SSL certificates between the two
Answer: B,C,F
Explanation:
Explanation/Reference: Integrating LTM systems with GTM systems on a network Running the bigip_add utility Determine the self IP addresses of the BIG-IP LTM systems that you want to communicate with BIG-IP GTM. Run the bigip_add utility on BIG-IP GTM. This utility exchanges SSL certificates so that each system isauthorized to communicate with the other. When the LTM and GTM systems use the same version of the big3d agent, you run the bigip_add utility toauthorize communications between the systems. http://support.f5.com/kb/en-us/products/big-ip_gtm/manuals/product/gtm-implementations11-3-0/7.html
Note: The BIG-IP GTM and BIG-IP LTM systems must have TCP port 4353 open through the firewall betweenthe systems. The BIG-IP systems connect and communicate through this port.
NEW QUESTION 49
ASM provides antivirus protection by:
- A. Running a local antivirus program on the BIG-IP
- B. None of the above
- C. Extracting files being uploaded and sending them to an AV system via ICAP
- D. Using IP Penalty enforcement to block requests from hackers IPs
Answer: C
Explanation:
Explanation/Reference: Supported ICAP Servers in TMOS 11.5:
NEW QUESTION 50
In which scenario is a packet forwarding architecture required?
- A. when HTTP header must be modified
- B. when cookie persistency is demanded
- C. when the server responds directly to the client
- D. when the number of TCP connections on the server should be reduced
Answer: C
NEW QUESTION 51
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined and the networks shown in the graphic below. Selected options for each object are shown below. Settings not shown are at their defaults. Assume port exhaustion has not been reached. VirtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap configured VirtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: 10.10.0.0 netmask 255.255.0.0 SNATAddress: SNAT Pool with 2 members-172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNAT Address:
10.10.2.102 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1
A connection attempt is made with a source IP and port of 10.20.10.50:2222 and a destination IP and port of 10.10.2.102:80.
When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: 172316.20.50; Destination IP: pool member in the 182.16/16 network
- B. Source IP: 182.16.1.1; Destination IP: pool member in the 172316/16 network
- C. Source IP: 10.20.10.50; Destination IP: pool member in the 172.16/16 network
- D. Source IP: 192.168.10.50; Destination IP: pool member in the 192.168./16 network
- E. The request will be dropped.
- F. Source IP: 10.20.10.50; Destination IP: pool member in the 192.168/16 network
- G. Source IP: 192.168.10.50; Destination IP: pool member in the 192.168/16 network
- H. Source IP: 192.168.1.1; Destination IP: pool member in the 192.168/16 network
Answer: B
NEW QUESTION 52
CSRF is difficult to detect because:
- A. The attacks are requests a user should be allowed to make
- B. The attacks always utilize obfuscation
- C. All of the above
- D. The attacks are always encrypted
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 53
......
Verified & Correct 101 Practice Test Reliable Source Feb 03, 2023 Updated: https://www.exam-killer.com/101-valid-questions.html
F5 101 Exam Preparation Guide and PDF Download: https://drive.google.com/open?id=1Lp9baVL-bNA5ldgeGXFnYPr4X4n0ZXry
